Ultrahigh Plateau‐Capacity Sodium Storage by Plugging Open Pores
Authors:
- 27 November 2024
- journal article
- research article
- Published by Wiley in Advanced Materials
- Vol. 37 (46) , e2410326
Abstract
Hard carbon (HC) stands out as the most promising anode material for sodium‐ion batteries (SIBs), and a precise adjustment of the pore structure is the key to achieving high plateau‐capacity. In this work, composite hard carbon is developed by integrating graphitic carbon with biomass waste (banana peel)‐derived activated carbon (AC). In this design, N‐doped pseudographite layer is stacked at the entrance of open pores, forming a long‐range graphitic layer without excessive graphitization. As a result, the surface area of AC is decreased by 170 times down to less than 10 m 3 g −1 , and the corresponding open pores are in situ converted into closed pores. In an optimized electrolyte solvation structure, the obtained HC anode achieves the reversible sodium‐storage capacity up to 524 mAh g −1 . In particular, a large portion of the capacity (490 mAh g −1 ) lies below the plateau of 0.25 V, which originates from the pore‐filling mechanism as revealed by in situ Raman. This study provides a straightforward method to modulate the pore structure of carbon materials, and an energy‐efficient (900 °C) synthesis for HC compared to traditional high‐temperature routes (e.g., ≈1300–2000 °C).Keywords
Funding Information
- National Natural Science Foundation of China (22279122)
This publication has 61 references indexed in Scilit:
- Pyridinic N‐Dominated Hard Carbon with Accessible Carbonyl Groups Enabling 98% Initial Coulombic Efficiency for Sodium‐Ion BatteriesAdvanced Functional Materials, 2024
- Demystifying the Influence of Precursor Structure on S‐Doped Hard Carbon Anode: Taking Glucose, Carbon Dots, and Carbon Fibers as ExamplesAdvanced Functional Materials, 2024
- Achieving All‐Plateau and High‐Capacity Sodium Insertion in Topological Graphitized CarbonAdvanced Materials, 2023
- Zinc Single‐Atom‐Regulated Hard Carbons for High‐Rate and Low‐Temperature Sodium‐Ion BatteriesAdvanced Materials, 2023
- Altering Thermal Transformation Pathway to Create Closed Pores in Coal‐Derived Hard Carbon and Boosting of Na+ Plateau Storage for High‐Performance Sodium‐Ion Battery and Sodium‐Ion CapacitorAdvanced Functional Materials, 2022
- Electrolyte Solvation Structure Design for Sodium Ion BatteriesAdvanced Science, 2022
- Enabling Fast Na+ Transfer Kinetics in the Whole‐Voltage‐Region of Hard‐Carbon Anodes for Ultrahigh‐Rate Sodium StorageAdvanced Materials, 2022
- Na‐Ion Batteries—Approaching Old and New ChallengesAdvanced Energy Materials, 2020
- Regulating Pore Structure of Hierarchical Porous Waste Cork‐Derived Hard Carbon Anode for Enhanced Na Storage PerformanceAdvanced Energy Materials, 2019
- Nonaqueous Hybrid Lithium‐Ion and Sodium‐Ion CapacitorsAdvanced Materials, 2017