An Integrated Chip High-Voltage Power Receiver for Wireless Biomedical Implants
Open Access
Abstract
In near-field wireless-powered biomedical implants, the receiver voltage largely overrides the compliance of low-voltage power receiver systems. To limit the induced voltage, generally, low-voltage topologies utilize limiter circuits, voltage clippers or shunt regulators, which are power-inefficient methods. In order to overcome the voltage limitation and improve power efficiency, we propose an integrated chip high-voltage power receiver based on the step down approach. The topology accommodates voltages as high as 30 V and comprises a high-voltage semi-active rectifier, a voltage reference generator and a series regulator. Further, a battery management circuit that enables safe and reliable implant battery charging based on analog control is proposed and realized. The power receiver is fabricated in 0.35-μm high-voltage Bipolar-CMOS-DMOStechnology based on the LOCOS0.35-μm CMOS process. Measurement results indicate 83.5% power conversion efficiency for a rectifier at 2.1 mA load current. The low drop-out regulator based on the current buffer compensation and buffer impedance attenuation scheme operates with low quiescent current, reduces the power consumption and provides good stability. The topology also provides good power supply rejection, which is adequate for the design application. Measurement results indicate regulator output of 4 ± 0.03 V for input from 5 to 30 V and 10 ± 0.05 V output for input from 11 to 30 V with load current 0.01–100 mA. The charger circuit manages the charging of the Li-ion battery through all if the typical stages of the Li-ion battery charging profile.Keywords
This publication has 34 references indexed in Scilit:
- A single-input dual-output 13.56 MHz CMOS AC–DC converter with comparator-driven rectifiers for implantable devicesMicroelectronics Journal, 2014
- Monitoring living cell assays with bio-impedance sensorsSensors and Actuators B: Chemical, 2013
- Application of Implantable Wireless Biomicrosystem for Monitoring Nerve Impedance of Rat After Sciatic Nerve InjuryIEEE Transactions on Neural Systems and Rehabilitation Engineering, 2012
- In Situ Measurement of Tissue Impedance Using an Inductive Coupling Interface CircuitIEEE Transactions on Biomedical Circuits and Systems, 2012
- A high-temperature, high-voltage, fast response linear voltage regulatorAnalog Integrated Circuits and Signal Processing, 2012
- Integrated High-Voltage Inductive Power and Data-Recovery Front End Dedicated to Implantable DevicesIEEE Transactions on Biomedical Circuits and Systems, 2011
- An Integrated Power-Efficient Active Rectifier With Offset-Controlled High Speed Comparators for Inductively Powered ApplicationsIEEE Transactions on Circuits and Systems I: Regular Papers, 2011
- An Efficiency-Enhanced CMOS Rectifier With Unbalanced-Biased Comparators for Transcutaneous-Powered High-Current ImplantsIEEE Journal of Solid-State Circuits, 2009
- A 110 nA Voltage Regulator System With Dynamic Bandwidth Boosting for RFID SystemsIEEE Journal of Solid-State Circuits, 2006
- Design and analysis of an adaptive transcutaneous power telemetry for biomedical implantsIEEE Transactions on Circuits and Systems I: Regular Papers, 2005