Optical and mechanical performance of a novel magnetically actuated MEMS-based optical switch
Authors:
- W.O. DavisWDW.O. Davis
- K.J. HoganKHK.J. Hogan
- M.R. HartMHM.R. Hart
- E.C. YingEYE.C. Ying
- M. ChaparalaMCM. Chaparala
- Behrang BehinBBBehrang Behin
- M.J. DanemanMDM.J. Daneman
- Meng-Hsiung KiangMKMeng-Hsiung Kiang
- 11 April 2005
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Microelectromechanical Systems
- Vol. 14 (2) , 274-284
Abstract
A novel magnetically actuated 8/spl times/8-port MEMS-based fiber-optic switch is described. Fiber-to-fiber insertion loss measurements of six 8/spl times/8 switch units show average and worst-case insertion loss of 1.3 dB and 2 dB, respectively. Low insertion loss is achieved through a unique MEMS design that uses anisotropically etched single-crystal silicon sidewalls to provide a global mechanical alignment stop for an array of MEMS mirrors. This alignment surface produces a uniform and repeatable mirror angle across the mirror array. Mirror misalignment is attributed to the surface roughness of the silicon sidewalls. Repeated interferometric measurements of the mirrors of 24 8/spl times/8 switch units show repeatability of the mirror angle of 3/spl times/10/sup -3/ degrees, while the uniformity of the mirror angle across the MEMS array is 2/spl times/10/sup -2/ degrees, in agreement with the angular error predicted from measurements of sidewall surface roughness. In turn, the average repeatability and uniformity of the insertion loss are 0.01 dB and 1 dB, respectively, in agreement with predictions based on the interferometric measurements. Finally, the unique dynamics of the magnetic actuation and electrostatic addressing scheme are described. Measurements show that fast switching can be achieved by driving the mirrors with a magnetic pulse that is faster than the mechanical resonant frequency of the mirror, relying on an electrostatic clamping force to capture the mirror as it overshoots the magnetic field angle. This actuation scheme is shown to result in switching times of 8.5 ms to 13.5 ms, but requires accurate control of the kinetic energy of the mirror.Keywords
This publication has 16 references indexed in Scilit:
- Optical and mechanical performance of a novel magnetically actuated MEMS-based optical switchJournal of Microelectromechanical Systems, 2005
- Electromagnetic micromirror array with single-crystal silicon mirror plate and aluminum springJournal of Lightwave Technology, 2003
- Techniques to study the reliability of metal RF MEMS capacitive switchesMicroelectronics Reliability, 2002
- Digital MEMS for optical switchingIEEE Communications Magazine, 2002
- Scalable optical cross-connect switch using micromachined mirrorsIEEE Photonics Technology Letters, 2000
- A high-speed low-voltage stress-induced micromachined 2 x 2 optical switchIEEE Photonics Technology Letters, 1999
- Electromagnetic torsion mirrors for self-aligned fiber-optic crossconnectors by silicon micromachiningIEEE Journal of Selected Topics in Quantum Electronics, 1999
- Free-space fiber-optic switches based on MEMS vertical torsion mirrorsJournal of Lightwave Technology, 1999
- Magnetically actuated, addressable microstructuresJournal of Microelectromechanical Systems, 1997
- Alignment of Gaussian beamsApplied Optics, 1984