Investigation on the influence of adhesive properties on the formability of adhesive-bonded steel sheets
- 9 May 2013
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 228 (3) , 405-425
Abstract
The main aim of this research work is to study the influence of adhesive properties on the formability of adhesive-bonded steel sheets. The adhesive properties were varied by having two different adhesives, epoxy based and acrylic based, and by changing the hardener to resin ratios. The deep drawing quality cold rolled steel and stainless steel (SS 316L) sheets were used as base materials. The epoxy and acrylic adhesives show improved elongation with increase in hardener to resin ratio. This is because of changeover of resin-rich formulation to hardener-rich formulation, making the sample more ductile. The adhesive-bonded blanks show improved elongation as compared to double sheets, which is due to the presence of adhesive delaying the onset of necking. With increase in hardener to resin ratio of both the adhesives, the elongation of individual sheets has improved. This is due to the improvement in elongation of adhesives with increase in hardener to resin ratio. The strain hardening exponent (n) of adhesive-bonded blanks has improved with increase in hardener to resin ratio in all the regions of deformation. The limit strain of deep drawing quality and SS 316L sheets constituting adhesive-bonded blanks shows improvement with increase in hardener to resin ratio. The adhesive-bonded blanks with interface bonding exhibit better limit strain as compared to the case without interface bonding.Keywords
This publication has 18 references indexed in Scilit:
- Fracture toughness and shear behavior of composite bonded joints based on a novel aerospace adhesiveComposites Part B: Engineering, 2012
- Aspects of network formation in glassy thermosetsJournal of Applied Polymer Science, 2010
- The mechanical behavior of adhesively bonded tailor-made blanksInternational Journal of Adhesion and Adhesives, 2009
- An experimental and analytical study of the mechanical behaviour of adhesively bonded joints for variable extension rates and temperaturesInternational Journal of Adhesion and Adhesives, 2008
- Ageing of the DGEBA/TETA epoxy system with off-stoichiometric compositionsMaterials Research, 2003
- The Role of the Resin Matrix/Hardener Ratio on the Mechanical Properties of Low Volume Fraction Epoxy CompositesAdvanced Performance Materials, 1997
- The effect of the resin/hardener ratio on the compressive behavior of an epoxy systemPolymer Testing, 1996
- A comparison of different grades of an acrylic adhesive for bonding an aluminium alloyInternational Journal of Adhesion and Adhesives, 1985
- A comparison of acrylic adhesives for bonding aluminum alloys after using various surface preparation methodsInternational Journal of Adhesion and Adhesives, 1984
- Theories of adhesion and uses of adhesives: a reviewPolymer, 1978