Wire Rope Fault Detection in a Hoisting Winch System by Motor Torque and Current Signature Analysis
- 13 January 2011
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 58 (5) , 1727-1736
Abstract
The aim of this paper is to analyze theoretically and experimentally the stator current and load torque of a three-phase induction machine in a hoisting winch system. This is performed in order to show how these variables are influenced by the wire rope faulty conditions. When the wire rope is subject to axial and torsional loads, the outer strands can be separated from the core in a permanent way and make the rope less reliable. The term “birdcaging” is used to describe this type of phenomenon by giving a permanent appearance of a wire rope forced into compression. In a hoisting winch system, the rope is bent over a drum and a pulley, and it is torsionally stressed by the fleet angle between them. In this paper, the effect of the fleet angle is observed in the stator current and the load torque in order to detect the “birdcaging” effect. This study is performed on a 22-kW three-phase squirrel-cage induction machine driving a reduced scale winch system, and it presents an original noninvasive way to detect a wire rope fault condition.Keywords
This publication has 33 references indexed in Scilit:
- Tension–torsion fatigue behaviour of wire ropes in offshore mooringsOcean Engineering, 2009
- Failure analysis of a cableway ropeEngineering Failure Analysis, 2009
- Analytical procedure for modelling recursively and wire by wire stranded ropes subjected to traction and torsion loadsInternational Journal of Solids and Structures, 2008
- Distribution of wire deformation within strands of wire ropesJournal of China University of Mining and Technology, 2008
- Airgap-Eccentricity Fault Diagnosis, in Three-Phase Induction Motors, by the Complex Apparent Power Signature AnalysisIEEE Transactions on Industrial Electronics, 2008
- Research on the fatigue and fracture behavior due to the fretting wear of steel wire in hoisting ropeWear, 2003
- Bending fatigue tests on a metallic wire rope for aircraft rescue hoistsEngineering Failure Analysis, 2003
- Effect of abrasive wear on the tensile strength of steel wire ropeEngineering Failure Analysis, 2002
- Effect of degradation and impaired quality on wire rope bending over sheave fatigue enduranceEngineering Failure Analysis, 2001
- Torsional failure of a wire rope mooring line during installation in deep waterEngineering Failure Analysis, 1999