Adsorption of Hydrolysed Polyacrylamide onto Calcium Carbonate
Open Access
Abstract
Carbonate rock strengthening using chemical techniques is a strategy to prevent excessive fines migration during oil and gas production. We provide herein a study of the adsorption of three types of hydrolysed polyacrylamide (HPAM) of different molecular weight (F3330S, 11–13 MDa; F3530 S, 15–17 MDa; F3630S, 18–20 MDa) onto calcium carbonate (CaCO3) particles via spectrophotometry using a Shimadzu UV-2600 spectrometer. The results are compared to different adsorption isotherms and kinetic models. The Langmuir isotherm shows the highest correlation coefficient (R2 > 0.97) with equilibrium parameters (RL) ranging between 0 and 1 for all three HPAMs, suggesting a favorable monolayer adsorption of HPAM onto CaCO3. The adsorption follows pseudo-second order kinetics, indicating that the interaction of HPAM with CaCO3 is largely dependent on the adsorbate concentration. An adsorption plot reveals that the amount of HPAM adsorbed onto CaCO3 at equilibrium increases with higher polymer molecular weight; the equilibrium adsorbed values for F3330S, F3530S and F3630S are approximately 0.24 mg/m2, 0.31 mg/m2, and 0.43 mg/m2, respectively. Zeta potential analysis shows that CaCO3 has a zeta potential of +12.32 mV, which transitions into negative values upon introducing HPAM. The point of zero charge (PZC) is observed at HPAM dosage between 10 to 30 ppm, in which the pH here lies between 9–10.Keywords
This publication has 31 references indexed in Scilit:
- Using Light Scattering to Screen Polyelectrolytes (PEL) Performance in FlocculationPolymers, 2011
- Surface Characterization of Model, Outcrop, and Reservoir Samples in Low Salinity Aqueous SolutionsJournal of Dispersion Science and Technology, 2011
- Adsorption of cationic polyacrylamide (C-PAM) on expanded perliteApplied Clay Science, 2010
- Influence of polymer charge on the shear yield stress of silica aggregated with adsorbed cationic polymersJournal of Colloid and Interface Science, 2009
- The use of LDS as a tool to evaluate flocculation mechanismsChemical Engineering and Processing - Process Intensification, 2008
- Adsorption of cationic polyacrylamide onto sepioliteJournal of Hazardous Materials, 2006
- Size and pH effect on electrical and conformational behavior of poly(acrylic acid): Simulation and experimentEuropean Polymer Journal, 2006
- Micro-mechanisms of pore collapse in limestoneJournal of Petroleum Science and Engineering, 1996
- Pore Collapse in Weakly Cemented and Porous RocksJournal of Energy Resources Technology, 1994
- Kinetic aspects of polymer and polyelectrolyte adsorption on surfacesAdvances in Colloid and Interface Science, 1994