Abstract
Easy dissolution of polysulfides and low loading of active materials are two major factors that limit the cathode cycling stability and energy density in lithium‐sulfur batteries. Herein, 3D hierarchical carbon with abundant pores is used for sulfur encapsulation (S@DHPC), which achieves a high sulfur content of 74 wt% and high sulfur loading of 5.8 mg cm−2. Importantly, coating the obtained S@DHPC electrode with poly(3,4‐ethylenedioxythiophene)‐poly(styrenesulfonate) (PEDOT:PSS) conducting polymers is found to effectively impede the diffusion of polysulfide species, leading to marked improvement of the cycling stability of the electrode; and the electrode performance increases with an increasing number of the S@DHPC/PEDOT:PSS layer. For a three‐layer electrode, at a current density of 2 C, it delivers a discharge capacity of 846 mAh g−1 in the first cycle and maintains a capacity of 716 mAh g−1 after 500 cycles, corresponding to a fading rate of only 0.033% cycle−1. Results from this study suggest that layered electrodes can be exploited as a unique electrode architecture for the fabrication of high‐performance lithium‐sulfur batteries.
Funding Information
  • National Natural Science Foundation of China (21528301, 51402111)

This publication has 42 references indexed in Scilit: