Kink bands promote exceptional fracture resistance in a NbTaTiHf refractory medium-entropy alloy
Authors:
Top Cited Papers
- 12 April 2024
- journal article
- research article
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 384 (6692) , 178-184
Abstract
Single-phase body-centered cubic (bcc) refractory medium- or high-entropy alloys can retain compressive strength at elevated temperatures but suffer from extremely low tensile ductility and fracture toughness. We examined the strength and fracture toughness of a bcc refractory alloy, NbTaTiHf, from 77 to 1473 kelvin. This alloy’s behavior differed from that of comparable systems by having fracture toughness over 253 MPa·m 1/2 , which we attribute to a dynamic competition between screw and edge dislocations in controlling the plasticity at a crack tip. Whereas the glide and intersection of screw and mixed dislocations promotes strain hardening controlling uniform deformation, the coordinated slip of edge dislocations with {110} and {112} glide planes prolongs nonuniform strain through formation of kink bands. These bands suppress strain hardening by reorienting microscale bands of the crystal along directions of higher resolved shear stress and continually nucleate to accommodate localized strain and distribute damage away from a crack tip.Keywords
This publication has 79 references indexed in Scilit:
- Microstructure and Mechanical Properties Evolution in HfNbTaTiZr Refractory High‐Entropy Alloy During Cold RollingAdvanced Engineering Materials, 2020
- Mo‐Si‐B Alloys for Ultrahigh‐Temperature Structural ApplicationsAdvanced Materials, 2012
- Microstructure and elevated temperature properties of a refractory TaNbHfZrTi alloyJournal of Materials Science, 2012
- Tensile behavior of a new single-crystal nickel-based superalloy (CMSX-4) at room and elevated temperaturesJournal of Materials Engineering and Performance, 1994
- Understanding fracture toughness in gamma TiAlJOM, 1992
- On macroscopic and microscopic analyses for crack initiation and crack growth toughness in ductile alloysMetallurgical Transactions A, 1985
- On the influence of state of stress on ductile failure initiation in high strength steelsEngineering Fracture Mechanics, 1977
- The microstructure of tensile kinks in cadmium crystalsPhysica Status Solidi (b), 1966
- Tensile Kinking in Single Crystals of CadmiumPhysica Status Solidi (b), 1965
- Structure and nature of kink bands in zincJOM, 1949