Parameters Influence on the Dynamic Properties of Polymer-Matrix Composites Reinforced by Fibres, Particles, and Hybrids
Open Access
Abstract
In this paper, we present an extensive experimental study on the dynamic mechanical properties of composites with polymer matrices, as well as a quantification of the parameters that influence these properties. Polymer-composite matrices make it possible to form any reinforcement arrangement of fibres, particles, and layers, which makes it possible to form composite materials with certain dominant mechanical properties according to the internal arrangement for the application. In this study, we focused on the dynamic properties (i.e., damping parameters, such as the loss factor (tan d), logarithmic decrement (λ), storage modulus (E′), and loss modulus (E″)) of composites with polymer matrices, including parameters such as the fibre material, fabric weaving, fibre orientation, temperature, frequency, particle size, volume of short fibres, and epoxy resin type. If other articles focus on one type of composite and 1–2 parameters, then the benefit of this article lies in our analysis of 8 mentioned parameters in the experimental analysis of 27 different types of composites with polymer matrices. The tested fibre materials were glass, aramid, and carbon; the tested woven fabrics were twill, plain, unidirectional, and satin; the temperature range was from −50 to +230 °C; the frequency was 1 Hz and 10 Hz; the particle size was 0.1–16 mm; the volume percentages of the short fibres were 3, 6, and 12 vol.% of the hybrid polymer composites and the type of polymer matrix. We used the free-damped-vibration method with vibration dynamic signal analysis and the forced-damped vibration of dynamic mechanical thermal analysis for testing. We ranked the parameters that influence the dynamic vibration properties according to the effects. Among sets of results provided in the paper, considering the storage modulus, loss modulus, and loss factor, the best results of the fibre composites were for aramid-fibre-reinforced polymers, regardless of the weave type, with an advantage for unidirectional fabric. The best results of the particle composites were for those with fine filler sizes that incorporated the short fibres.Keywords
Funding Information
- Agentúra na Podporu Výskumu a Vývoja (APVV-18-0316)
This publication has 29 references indexed in Scilit:
- Uncertainty quantification in multiscale simulation of woven fiber compositesComputer Methods in Applied Mechanics and Engineering, 2018
- Vibration Damping of Carbon Nanotube Assembly MaterialsAdvanced Engineering Materials, 2017
- Mechanical Properties of a New Type of Architected Interpenetrating Phase Composite MaterialsAdvanced Materials Technologies, 2016
- Modeling of stress transfer behavior in fiber-matrix composite under axial and transverse loadingsComposite Interfaces, 2016
- Study of Surface Roughness of Machined Polymer Composite MaterialInternational Journal of Polymer Science, 2015
- Energy Dissipation Due to Interfacial Slip in Nanocomposites Reinforced with Aligned Carbon NanotubesACS Applied Materials & Interfaces, 2015
- A Numerical Study on Electrical Percolation of Polymer‐Matrix Composites with Hybrid Fillers of Carbon Nanotubes and Carbon BlackJournal of Nanomaterials, 2014
- Optimization of the polymer concrete used for manufacturing bases for precision tool machinesComposites Part B: Engineering, 2012
- Vibration damping characteristics of carbon fiber-reinforced composites containing multi-walled carbon nanotubesComposites Science and Technology, 2011
- Development and Temperature Dependency of High Damping Sandwich LaminatesTRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 2005