Improved and modified geometric formulation of POE based kinematic calibration of serial robots
Authors:
- 1 October 2009
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21530858,p. 5261-5266
Abstract
The authors proposed in this paper an improved geometric formulation of POE (product of exponential) based kinematic calibration of serial robots. We use both joint offset-free formulation and adjoint transformation errors of joint screws, and apply it to the calibration of an elbow manipulator. Our formulation explains why the original POE calibration always fails with the existence of joint offset errors; the adjoint formulation of joint screw errors eliminates joint screw constraints that was imposed in the original iterated least square calibration algorithm. The second contribution of this paper is the proposal of a modified POE formulation which adopts point measurement data instead of frame measurement data of the end-effector, which can be more realistic and convenient for practical implementation. Simulation results show that the proposed method is plausible and effective. An experiment is under preparation to verify the effectiveness of the proposed calibration method on an elbow manipulator built by Googol Technology.Keywords
This publication has 8 references indexed in Scilit:
- Active versus passive transformations in roboticsIEEE Robotics & Automation Magazine, 2006
- A Projection Method for Least Squares Problems with a Quadratic Equality ConstraintSIAM Journal on Matrix Analysis and Applications, 2003
- Self calibration of Stewart-Gough parallel robots without extra sensorsIEEE Transactions on Robotics and Automation, 1999
- An absolute stability criterion for the Lur'e problem with sector and slope restricted nonlinearitiesIEEE Transactions on Circuits and Systems I: Regular Papers, 1998
- Self-calibration of parallel mechanisms with a case study on Stewart platformsIEEE Transactions on Robotics and Automation, 1997
- The Calibration Index and Taxonomy for Robot Kinematic Calibration MethodsThe International Journal of Robotics Research, 1996
- Kinematic calibration using the product of exponentials formulaRobotica, 1996
- An implicit loop method for kinematic calibration and its application to closed-chain mechanismsIEEE Transactions on Robotics and Automation, 1995