An Innovative Approach to Electrical Motor Geometry Generation Using Machine Learning and Image Processing Techniques
Open Access
- 16 May 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 48651-48666
Abstract
This paper presents a methodology for generating geometries for interior permanent magnet (IPM) motors in electric vehicles (EVs) through the application of artificial intelligence (AI) and image processing (IP) techniques. Due to the implementation of green agreements and policies aimed at reducing greenhouse gas emissions, EVs have become popularity. As a consequence, the improvement studies on the powertrain and battery system of EVs are focused. Especially for the powertrain, design optimization studies of e-motor have increased in the literature. One of the most widely used e-motor topologies is interior permanent magnet (IPM) motor. However, designing the IPM motor presents a challenge due to the dynamic considerations with geometric constraints. Therefore, e-motor designers encounter challenges related to determining initial geometry and the long time of the optimization process. To address these challenges, a novel approach is proposed that leverages machine learning (ML) techniques in combination with IP to generate initial geometries and design parameters for IPM motors. The proposed approach generates images of the motor geometry and extract dimensional features from the resulting images by using artificial neural networks (ANNs). The proposed method performs an analysis of the input vectors to reduce their size using techniques such as Histogram, 2D Maximum, 2D Mean, 2D Minimum, 2D Standard Deviation, and 2D Variance to enhance feature extraction. Additionally, FFT (Fast Fourier Transform) and IFFT (Inverse Fast Fourier Transform) are used to improve the neural network process in generating the image geometry. Further, the generated image geometry is improved by applying digital filtering techniques such as Log, FFT, Log+FFT, Laplacian, Sobel, and Histogram Equalization. Finally, the trained ANNs are tested to validate the results by using Ansys RMXprt and Maxwell. Eventually, the proposed method represents an innovative solution to generating initial geometries for IPM motors in EVs that satisfies desired design requirements. This approach leverages the power of AI and image processing techniques, which could lead to significant improvements in the optimization process for IPM motors, accelerate the designer’s analysis process, and enhance the performance of EVs.Keywords
This publication has 55 references indexed in Scilit:
- Mitigating Asymmetric Nonlinear Weight Update Effects in Hardware Neural Network Based on Analog Resistive SynapseIEEE Journal on Emerging and Selected Topics in Circuits and Systems, 2017
- FFT Consolidated Sparse and Collaborative Representation for Image ClassificationArabian Journal for Science and Engineering, 2017
- Characterizing BEV Powertrain Energy Consumption, Efficiency, and Range During Official and Drive Cycles From Gothenburg, SwedenIEEE Transactions on Vehicular Technology, 2015
- Analysis of driving cycles effects on power supply requirements of a fuel cell powered light-weight electric vehicle2015
- Driving cycle-based design optimization of interior permanent magnet synchronous motor drives for electric vehicle application2014
- Induction motor drive design for traction application based on drive-cycle energy minimization2014
- Thermal Design and Analysis of 6-phase Fractional Slot Permanent Magnet Machines Considering Driving Cycles2014
- Comparison of different driving cycles control effects of an extended-range electric bus2013
- Life expectancy calculation for electric vehicle traction motors regarding dynamic temperature and driving cycles2011
- Dynamic driving cycle analyses using electric vehicle time-series data2002