Novel GIMS technique for deposition of colored Ti/TiO₂ coatings on industrial scale
Open Access
- 1 March 2016
- journal article
- research article
- Published by Walter de Gruyter GmbH in Materials Science-Poland
- Vol. 34 (1) , 137-141
Abstract
The aim of the present paper has been to verify the effectiveness and usefulness of a novel deposition process named GIMS (Gas Injection Magnetron Sputtering) used for the flrst time for deposition of Ti/TiO₂ coatings on large area glass Substrates covered in the condition of industrial scale production. The Ti/TiO₂ coatings were deposited in an industrial System utilizing a set of linear magnetrons with the length of 2400 mm each for covering the 2000 × 3000 mm glasses. Taking into account the speciflc course of the GIMS (multipoint gas injection along the magnetron length) and the scale of the industrial facility, the optical coating uniformity was the most important goal to check. The experiments on Ti/TiO₂ coatings deposited by the use of GIMS were conducted on Substrates in the form of glass plates located at the key points along the magnetrons and intentionally non-heated during any stage of the process. Measurements of the coatings properties showed that the thickness and optical uniformity of the 150 nm thick coatings deposited by GIMS in the industrial facility (the thickness differences on the large plates with 2000 mm width did not exceed 20 nm) is fully acceptable form the point of view of expected applications e.g. for architectural glazing.Keywords
This publication has 22 references indexed in Scilit:
- Machining performance of Ti–Al–Si–N coated insertsSurface and Coatings Technology, 2010
- High power pulsed magnetron sputtering: Fundamentals and applicationsJournal of Alloys and Compounds, 2009
- Concept, techniques, deposition mechanism of impulse plasma deposition — A short reviewSurface and Coatings Technology, 2007
- Application of the duplex TiN coatings to improve the tribological properties of Electro Hydrostatic Actuator pump partsSurface and Coatings Technology, 2005
- Recent aspects concerning DC reactive magnetron sputtering of thin films: a reviewSurface and Coatings Technology, 2000
- Combined impulse-stationary impulse plasma depositionSurface and Coatings Technology, 1998
- Duplex antiabrasive coatings (Fe-based alloy-tin) produced by impulse plasma depositionSurface and Coatings Technology, 1998
- Large-scale antireflective coatings on glass produced by reactive magnetron sputteringSurface and Coatings Technology, 1998
- Spreading of impulse plasma within a coaxial acceleratorSurface and Coatings Technology, 1995
- The structure and mechanical properties of carbon layers formed by crystallization from pulse plasmaJournal of Materials Science, 1986