Impact of Whirl and Axial Motion on Ball Bearing Turbocharger Dynamics
Authors:
- 4 March 2023
- journal article
- research article
- Published by Taylor & Francis in Tribology Transactions
- Vol. 66 (2) , 338-349
Abstract
Ball bearing turbochargers (TCs) incorporate an angular contact ball bearing cartridge to reduce friction and oil consumption, improving the efficiency of internal combustion engines. In this investigation, axial and radial TC rotor motion was experimentally measured and used to develop a model of the TC rotor-bearing system, allowing for a detailed analysis of the TC bearing under varying operating conditions. In order to achieve the experimental objectives of this investigation, eddy-current proximity probes were used to measure the radial motion at the turbine and compressor sides of the TC. The measured radial motion shows whirl with subharmonics at low speed. The measured axial motion of the rotor was found to increase with TC speed. In order to analytically investigate the bearing dynamics, a complete TC model was developed which includes the mass distribution and flexibility of the TC compressor, shaft and turbine, and squeeze film dampers (SFDs) which support the bearing cartridge. The model was used to replicate the whirl and axial motion of the test rig and then to determine which model parameters could be adjusted to minimize whirl without negatively affecting the bearing dynamics. Simulation results revealed that centrifugal effects cause a change in the bearing internal geometry, with a small clearance becoming a preload at higher speeds. When this effect is coupled with less compliant SFDs, the subharmonics are reduced and the overall sliding and number of large load cycles at the ball-race contacts are minimized, contributing to lower bearing friction and improved overall life.Keywords
This publication has 39 references indexed in Scilit:
- Catcher Bearing Life Prediction Using a Rainflow Counting ApproachJournal of Tribology, 2012
- Experimental and Analytical Investigation of High Speed Turbocharger Ball BearingsJournal of Engineering for Gas Turbines and Power, 2011
- Nonlinear dynamics of a rotor-ball bearing system with Alford forceJournal of Vibration and Control, 2011
- Nonlinear oscillations of automotive turbocharger turbinesJournal of Sound and Vibration, 2009
- Experimental Test Results for Vibration of a High Speed Diesel Engine TurbochargerTribology Transactions, 2008
- Stability Analysis of a High-Speed Automotive TurbochargerTribology Transactions, 2007
- Ultra-High-Speed Performance of Ball Bearings and Annular Seals in Liquid Hydrogen at Up to 3 Million DN (120,000 rpm)©Tribology Transactions, 2004
- Tribo-Characteristics of Cryogenic Hybrid Ceramic Ball Bearings for Rocket Turbopumps: Bearing Wear and Transfer Film©Tribology Transactions, 1999
- Wear prediction for metalsTribology International, 1997
- Transient Ball Motion and Skid in Ball BearingsJournal of Lubrication Technology, 1975