High strain rate properties of a polymer-bonded sugar: their dependence on applied and internal constraints
Authors:
- 19 February 2008
- journal article
- research article
- Published by The Royal Society in Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences
- Vol. 464 (2093) , 1229-1255
Abstract
This paper describes research performed on a polymer-bonded sugar (PBS) consisting of 66% caster sugar in a hydroxyl-terminated polybutadiene (HTPB) binder The mechanical response of the PBS and pure HTPB to applied loading at a strain rate of approximately 2000 s −1 at temperatures from −80 to +22°C is presented. The materials were also characterized using dynamic mechanical analysis, X-ray tomography and quasi-static loading. These measurements are required for the development of intermediate strain rate constitutive models of polymer-bonded explosives, for which PBSs are a commonly used mechanical simulant. The current constitutive modelling suffers from a lack of experimental data on well-characterized composites and binders, especially at intermediate strain rates. This is particularly important for understanding the effects of mixing two materials. Applications of such modelling include explosive safety and fundamental understanding of the various deformation mechanisms. In this paper, the dependences of strength and deformation mechanism on temperature, and, in particular, the glass transition temperature of the binder, are shown. Physical damage plays an important role; X-ray tomography scans support debonding as the primary form of damage during room-temperature deformation. These results are in agreement with previous investigations and are discussed in this context.Keywords
This publication has 39 references indexed in Scilit:
- Behaviour of ammonium perchlorate–based propellants and a polymer–bonded explosive under impact loadingProceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2004
- Dynamic mechanical study on the thermal aging of a hydroxyl‐terminated polybutadiene‐based energetic compositeJournal of Applied Polymer Science, 2003
- High-speed photographic study of the drop-weight impact response of ultrafine and conventional PETN and RDXCombustion and Flame, 2002
- Quasi–static studies of the deformation and failure of β –HMX based polymer bonded explosivesProceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2002
- Combustion of damaged PBX 9501 explosiveThermochimica Acta, 2002
- Plastic deformation, energy dissipation, and initiation of crystalline explosivesPhysical Review B, 1999
- Impact sensitivity of propellantsProceedings of the Royal Society of London. Series A: Mathematical and Physical Sciences, 1992
- The deformation and fracture of β-HMXProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1982
- The ignition of a thin layer of explosive by impact; the effect of polymer particlesProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1982
- Initiation and Growth of Explosion in Liquids and SolidsAmerican Journal of Physics, 1952