Process Stability, Microstructure and Mechanical Properties of Underwater Submerged-Arc Welded Steel
Open Access
Abstract
In underwater wet welding, the unstable welding process caused by the generation and rupture of bubbles and the chilling effect of water on the welding area result in low quality of welded joints, which makes it difficult to meet the practical application of marine engineering. To improve the process stability and joining quality, a mixture of welding flux with a water glass or epoxy resin was placed on the welding zone before underwater welding. In this paper, welds’ appearance, geometry statistics of welds’ formation, welding process stability, slag structure, microstructure, pores and mechanical properties were investigated. It was found that with the addition of water glass in the mixture, the penetration of weld was effectively increased, and the frequency of arc extinction was reduced. Though the porosity rose to a relatively high level, the joints’ comprehensive mechanical properties were not significantly improved. Notably, the applied epoxy resin completely isolated the surrounding water from the welding area, which greatly improved process stability. Furthermore, it benefited from the microstructure filled with massive acicular ferrite, the average elongation and room temperature impact toughness increased by 178.4%, and 69.1% compared with underwater wet welding, respectively, and the bending angle of the joint reaches to 180°.Keywords
Funding Information
- National Natural Science Foundation of China (51675310)
This publication has 18 references indexed in Scilit:
- Temper Bead Welding of S460N Steel in Wet Welding ConditionsAdvances in Materials Science, 2018
- Characterization of the underwater welding arc bubble through a visual sensing methodJournal of Materials Processing Technology, 2018
- Effect of ultrasonic vibration on microstructural evolution and mechanical properties of underwater wet welding jointJournal of Materials Processing Technology, 2017
- Study of metal transfer control in underwater wet FCAW using pulsed wire feed methodWelding in the World, 2017
- Temper Bead Welding of S420G2+M Steel in Water EnvironmentAdvances in Materials Science, 2016
- Microstructure and mechanical properties of ultrasonic assisted underwater wet welding jointsMaterials & Design, 2016
- Enhancement of the fatigue strength of underwater wet welds by grinding and ultrasonic impact treatmentJournal of Materials Processing Technology, 2015
- Study correlating the bubble phenomenon and electrical signals in underwater wet welding with covered electrodesWelding International, 2014
- Underwater arc welding of higher strength low-alloy steelsWelding International, 2010
- Mechanisms of rapid cooling in underwater weldingApplied Ocean Research, 1979