Downhole Measurement and Monitoring Lead to an Enhanced Understanding of Drilling Vibrations and Polycrystalline Diamond Compact Bit Damage
Authors:
- 4 July 2013
- journal article
- Published by Society of Petroleum Engineers (SPE) in SPE Drilling & Completion
- Vol. 28 (03) , 254-262
Abstract
Summary: Since backward whirl was discovered as a severe cause of polycrystalline diamond compact (PDC) bit failure, the oil and gas industry has made great strides toward creating whirl-resistant bits and operating practices. But is whirl still the major cause of PDC bit damage in conventional rotary applications? This paper reports on a recent field study in which downhole vibrations were measured by use of a newly available in-bit vibration-monitoring device. The focus of this study was to understand the primary source of bit damage. In addition, four wells were also drilled by use of a research drilling rig in Oklahoma. In these tests, the PDC bits, bottomhole assemblies (BHAs), and operating parameters were varied to document their effect on downhole vibrations. In these four wells, vibration measurements from the new in-bit measuring device were validated against a commercially available and industry-proven measurement-while-drilling (MWD) vibration-monitoring service. The results of this study indicate that the most common field vibration in hard-rock vertical conventional rotary drilling is stick/slip, not whirl. In field tests, stick/slip was observed almost exclusively. For typical field applications with a surface rotary speed of approximately 70 rpm, the team measured a peak downhole rpm as high as 500 during the slip phase. Stick/slip was identified as the primary cause of bit damage in these applications. Lateral vibration occurring during the slip phase correlated well with the observed damage and is proposed as a new mode of damage during stick/slip. The characterization of the lateral vibrations coupled with stick/slip is presented on the basis of downhole measurements.Keywords
This publication has 18 references indexed in Scilit:
- Drill Pipe Dynamic Measurements Provide Valuable Insight Into Drill String Dysfunctions2011
- Mitigation of Torsional Stick-Slip Vibrations in Oil Well Drilling through PDC Bit Design: Putting Theories to the Test2011
- Decoupling Stick-Slip and Whirl to Achieve Breakthrough in Drilling Performance2010
- A New Method of Producing Laterally Stable PDC Drill Bits2006
- Stick-slip Whirl Interaction in Drillstring DynamicsJournal of Vibration and Acoustics, 2002
- Downhole Diagnosis of Drilling Dynamics Data Provides New Level Drilling Process Control to Driller1998
- Torsional Resonance of Drill Collars with PDC Bits in Hard Rock1998
- The Destruction of PDC Bits by Severe Slip-Stick Vibration1997
- The Design and Testing of Anti-Whirl Bits1992
- High Data-Rate Drilling Telemetry SystemJournal of Petroleum Technology, 1979