Mechanical Properties of Laser Weldment of V-4Cr-4Ti Alloy
Authors:
- 1 September 2003
- journal article
- research article
- Published by Taylor & Francis in Fusion Science and Technology
- Vol. 44 (2) , 470-474
Abstract
The effect of the laser welding condition on properties of the weldment, such as bending, tensile and charpy impact properties were investigated in a V-4Cr-4Ti alloy (NIFS-HEAT-2). The microstructural and microchemical development in the weldment was also investigated for mechanistic study of the impurity behavior during the welding. Increase in hardness occurred in the weld zone. The hardening was due to the dissolution of the large and small precipitates existed in the base metal before welding. The degree of hardening varied with a distance from the bead center. The absorption energy by the impact test increased with the decrease in the input power density during the laser welding. The impact absorption energy of the weld, which is similar to that of the base metal, was obtained by optimizing the welding condition.Keywords
This publication has 11 references indexed in Scilit:
- NIFS program for large ingot production of a V–Cr–Ti alloyJournal of Nuclear Materials, 2000
- Recovery and recrystallization behavior of vanadium at various controlled nitrogen and oxygen levelsJournal of Nuclear Materials, 2000
- Critical issues and current status of vanadium alloys for fusion energy applicationsJournal of Nuclear Materials, 2000
- Fabrication of a 1200 kg ingot of V–4Cr–4Ti alloy for the DIII–D radiative divertor programJournal of Nuclear Materials, 1998
- Development of techniques for welding V–Cr–Ti alloysJournal of Nuclear Materials, 1998
- Research and development on vanadium alloys for fusion applicationsJournal of Nuclear Materials, 1998
- Development and testing of vanadium alloys for fusion applicationsJournal of Nuclear Materials, 1996
- Status of vanadium alloys for fusion reactorsJournal of Nuclear Materials, 1996
- Effects of neutron irradiation and hydrogen on ductile-brittle transition temperatures of V-Cr-Ti alloysJournal of Nuclear Materials, 1994
- Alloying and impurity effects in vanadium-base alloysJournal of Nuclear Materials, 1986