Minimizing the cycle time in serial manufacturing systems with multiple dual-gripper robots
Authors:
- 15 February 2006
- journal article
- research article
- Published by Taylor & Francis in International Journal of Production Research
- Vol. 44 (4) , 639-652
Abstract
Robots are being used more and more extensively as material-handling systems for automated manufacturing systems. This is especially true for dual-gripper robots whose in-process buffer (the robot's second gripper) constitutes a further element of flexibility. When the number of stations to be served is high and the set of activities the robot must execute is great, the system throughput may depend on robot capability rather than on process times. In such conditions, the use of several robots leads to an increase in system productivity. Obviously, the design and the management of such a handling system becomes more complex: the minimum number of robots required, the work stations to be served by each of them and the robot move cycles must be all determined so as to minimize the cycle time of a multi-robot serial system. Since the aim of minimizing the cycle time could lead to a non-univocal configuration, a secondary objective may be pursued. To this aim, the classic case of a single dual-gripper robotic cell is preliminarily revisited, using a practical rather than a theoretical approach, to show that, under the conditions of minimum cycle time, it is possible to take into account both the reduction of the WIP and that of the length of the transitory periods.Keywords
This publication has 9 references indexed in Scilit:
- Scheduling Multiple Parts in a Robotic Cell Served by a Dual-Gripper RobotOperations Research, 2004
- Optimal moves of the material handling system in a robotic cellInternational Journal of Production Economics, 2001
- Scheduling in dual gripper robotic cells for productivity gainsIEEE Transactions on Robotics and Automation, 2001
- Scheduling in Robotic Cells: Heuristics and Cell DesignOperations Research, 1999
- Scheduling large robotic cells without buffersAnnals of Operations Research, 1998
- Combinatorial optimization models for production scheduling in automated manufacturing systemsEuropean Journal of Operational Research, 1997
- Optimal sequencing of double-gripper gantry robot moves in tightly-coupled serial production systemsIEEE Transactions on Robotics and Automation, 1996
- Sequencing of parts and robot moves in a robotic cellInternational Journal of Flexible Manufacturing Systems, 1992
- A structure for sequencing robot activities in machine tending applicationsInternational Journal of Production Research, 1985