Experimental investigation of the effect of nickel on the electrical resistivity of Fe-Ni and Fe-Ni-S alloys under pressure
Author:
- 1 July 2020
- journal article
- research article
- Published by Mineralogical Society of America in American Mineralogist: Journal of Earth and Planetary Materials
- Vol. 105 (7) , 1069-1077
Abstract
Electrical resistivity experiments were conducted on three alloys in the iron-rich side of the Fe-Ni(-S) system (Fe-5 wt% Ni, Fe-10 wt% Ni, Fe-10 wt% Ni-5 wt% S) at 4.5 and 8 GPa and up to 1900 K using the multi-anvil apparatus and the 4-electrode technique. For all samples, increasing temperature increases resistivity. At a specified temperature, Fe-Ni(-S) alloys are more resistive than Fe by a factor of about 3. Fe-Ni alloys containing 5 and 10 wt% Ni present comparable electrical resistivity values. The resistivity of Fe-Ni(-S) alloys is comparable to the one of Fe = 5 wt% S at 4.5 GPa and is about three times higher than the resistivity of Fe = 5 wt% S at 8 GPa, due to a different pressure dependence of electrical resistivity between Fe-Ni and Fe-S alloys. Based on these electrical results and experimentally determined thermal conductivity values from the literature, lower and upper bounds of thermal conductivity were calculated. For all Ni-bearing alloys, thermal conductivity estimates range between ~12 and 20 W/(m⋅K) over the considered pressure and temperature ranges. Adiabatic heat fluxes were computed for both Ganymede's core and the Lunar core, and heat flux values suggest a significant dependence to both core composition and the adiabatic temperature. Comparison with previous thermochemical models of the cores of Ganymede and the Moon suggests that some studies may have overestimated the thermal conductivity and hence, the heat flux along the adiabat in these planetary cores.Keywords
This publication has 56 references indexed in Scilit:
- Melting of Iron at Earth’s Inner Core Boundary Based on Fast X-ray DiffractionScience, 2013
- Electrical resistivity and thermal conductivity of liquid Fe alloys at high P and T , and heat flux in Earth’s coreProceedings of the National Academy of Sciences, 2012
- Bottom-up versus top-down solidification of the cores of small solar system bodies: Constraints on paradoxical coresEarth and Planetary Science Letters, 2009
- Effect of Ni on Fe–FeS phase relations at high pressure and high temperatureEarth and Planetary Science Letters, 2008
- Structure of eutectic Fe–FeS melts to pressures up to 17 GPa: Implications for planetary coresEarth and Planetary Science Letters, 2007
- Sound wave velocities of fcc Fe–Ni alloy at high pressure and temperature by mean of inelastic X-ray scatteringPhysics of the Earth and Planetary Interiors, 2007
- In-situcombined X-ray diffraction and electrical resistance measurements at high pressures and temperatures in diamond anvil cellsHigh Pressure Research, 2007
- In situ X-ray diffraction studies of iron to Earth-core conditionsPhysics of the Earth and Planetary Interiors, 2004
- Density measurements of liquid Fe‐S alloys at high‐pressureGeophysical Research Letters, 2000
- Constitution of Binary AlloysJournal of the Electrochemical Society, 1958