RETRACTED: Studies on improved stability and electrochemical activity of metal oxides/sulfides‐based polymer nanocomposites for energy storage applications
- 19 March 2024
- journal article
- retracted article
- Published by Wiley in Polymer Engineering & Science
- Vol. 64 (6) , 2640-2661
Abstract
Poly (3‐methylthiophene) (P3MT) was modified by nickel oxide (NiO) and nickel sulfide (NiS) nanoparticles to enhance its electrochemical performance. The surface influence, crystalline structure, and electrochemical performance of the P3MT/NiO/NiS material were characterized and compared with that of pristine P3MT. It is found that surface modification can improve the structural stability of P3MT without decreasing its available specific capacitance. The electrochemical properties of synthesized P3MT/NiO/NiS electrode were evaluated using cyclic voltammetry and alternating current impedance techniques in 3 M KOH electrolyte. Specific capacitances of 253, 764, 932, and 1434 F g−1 were obtained for P3MT, P3MT/NiO, P3MT/NiS, and P3MT/NiO/NiS, respectively at 5 A g−1. This improvement is attributed to the synergistic effect of Ni2+ ions in the P3MT/NiO/NiS electrode material. The P3MT/NiO/NiS electrode in KOH has average specific energy and specific power densities of 1032 Wh kg−1 and 6192 W/kg, respectively. Only 2% of the capacitance's initial value is lost after 10,000 cycles. The resulting P3MT/NiO/NiS nanocomposite had very stable and porous layered structures. This work demonstrates that P3MT/NiO/NiS nanomaterials exhibit good structural stability and electrochemical performance, and are good material for supercapacitor applications.Highlights: The P3MT/NiO/NiS nanocomposite is fabricated and characterized as supercapacitor electrode. The incorporation of NiO/NiS in the poly (3‐methylthiophene) has improved the electrochemical performance. The P3MT/NiO/NiS electrodes retained 98% of their specific capacitance after 10,000 cycles. The P3MT/NiO/NiS nanocomposite electrode showed specific capacitance of 1434 F g−1 at 5 A g−1. The stability of the nanocomposite was enhanced without altering its morphology and chemical structure.Keywords
This publication has 65 references indexed in Scilit:
- RETRACTED: Synthesis and characterization of polypyrrole/graphitic carbon nitride/niobium pentoxide nanocomposite for high‐performance energy storage applicationsJournal of Applied Polymer Science, 2024
- Effect of chemical exfoliation on the specific capacitance of MoS2 decorated conducting polymer electrodes for supercapacitor applicationsApplied Physics A, 2023
- Chemisynthesized tungsten oxide (WO3) electrodes for high-performance asymmetric supercapacitor application: effect of deposition timeJournal of Materials Science: Materials in Electronics, 2023
- Polythiophene-based reduced graphene oxide and carbon black nanocomposites for supercapacitorsIranian Polymer Journal, 2023
- RETRACTED ARTICLE: Fabrication of reduced graphene oxide encapsulated MnO2/MnS2 nanocomposite for high performance electrochemical devicesJournal of Porous Materials, 2023
- Rational design and electrochemical validation of reduced graphene oxide (rGO) supported CeO2-Nd2O3/rGO ternary nanocomposite as an efficient material for supercapacitor electrodesJournal of Applied Electrochemistry, 2023
- Symmetric supercapacitor device applications of rGO / Co3O4 / polypyrrole nanocompositesIonics, 2022
- Interfacial photo-reduction of graphene oxide on defective WO3−x for multifunctional applications in sensor, catalyst and supercapacitorApplied Surface Science, 2022
- RETRACTED: Novel synthesis of layered MoS2/TiO2/CNT nanocomposite as a potential electrode for high performance supercapacitor applicationsInternational Journal of Energy Research, 2022
- Hydrothermal synthesis and characterization of lead oxide nanocrystal in presence of tetradentate Schiff-base and degradation investigation of organic pollutant in waste waterJournal of Materials Science: Materials in Electronics, 2017