Influence of trimodal polymerization on melt rheology, thermal, and mechanical properties of HDPE resin
Authors:
- 12 March 2024
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 64 (6) , 2374-2386
Abstract
Trimodal polymerization of polyethylene has become a research interest in recent years due to its excellent potential for altering material properties and overcoming the limitations of the bimodal process. Here, we have comprehensively investigated the effects of manipulating polymerization parameters, such as split value (SV), hydrogen‐to‐ethylene ratio (H2/C2), and stage switching, on the rheological, thermal, and mechanical properties of synthesized trimodal high‐density polyethylene (HDPE). The synthesized samples were obtained through three consecutive stages in a slurry lab‐scale reactor. The results of molten state analysis demonstrate that recipe modification, particularly SV and H2/C2 balancing in the second and third stages, had a dramatic effect on the rheological properties including dynamic moduli, G′‐G″ crossover, and the shear‐thinning behavior. Concurrently, improvements in physio‐mechanical properties, such as sagging behavior and slow crack growth resistance (SCG), were observed compared to the bimodal resin. The thermal characterization indicates that the polymerization adjustments made did not notably impact the thermal properties of HDPE samples (e.g., Tm), throughout the all‐recipe manipulation. However, minor fluctuations in crystallinity and crystallization kinetics were observed which was presumably attributed to the molecular weight of the final resin. Overall, in our trimodal polymerization recipe, the HDPE powder is within the specified range of particle size distribution, which ensures excellent bulk density and flowability.Highlights: Influence of polymerization parameters such as split value, H2/C2, and stage switching in properties of trimodal HDPE. HDPE resin received from split value and H2/C2 balancing have superior SCG and sagging resistance. All HDPE samples synthesized by different recipes have similar thermal properties.Keywords
This publication has 32 references indexed in Scilit:
- Experimental study on the effect of molecular weight and chemical composition distribution on the mechanical response of high‐density polyethylenePolymer Engineering & Science, 2022
- Effects of polymerization parameters on the slow crack growth resistance and rheological properties of bimodal polyethylene resinsJournal of Applied Polymer Science, 2021
- Effect of Molecular Structure Parameters on Crystallinity and Environmental Stress Cracking Resistance of High‐Density Polyethylene/TiO2 NanocompositesAdvances in Polymer Technology, 2016
- Effective dissolution of UHMWPE in HDPE improved by high temperature melting and subsequent shearPolymer Engineering & Science, 2014
- Crystallization and fracture behaviors of high‐density polyethylene/linear low‐density polyethylene blends: The influence of short‐chain branchingJournal of Applied Polymer Science, 2013
- Polyolefin Reaction Engineering2012
- Synthesis of Bimodal Polyethylene Using Ziegler‐Natta Catalysts by Multiple H2 Concentration Switching in a Single Slurry ReactorMacromolecular Reaction Engineering, 2010
- Critical review of the molecular topology of semicrystalline polymers: The origin and assessment of intercrystalline tie molecules and chain entanglementsJournal of Polymer Science Part B: Polymer Physics, 2005
- Self‐nucleation and recrystallization of isotactic polypropylene (α phase) investigated by differential scanning calorimetryJournal of Polymer Science Part B: Polymer Physics, 1993
- Determination of the Avrami exponent of partially crystallized polymers by DSC- (DTA-) analysesColloid and Polymer Science, 1983