Co-modified MCM-41 as an effective adsorbent for levofloxacin removal from aqueous solution: optimization of process parameters, isotherm, and thermodynamic studies
Authors:
- 21 December 2016
- journal article
- research article
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 24 (6) , 5238-5248
Abstract
Antibiotics are emerging contaminants due to their potential risks to human health and ecosystems. Poor biodegradability makes it necessary to develop effective physical-chemical methods to eliminate these contaminants from water. The cobalt-modified MCM-41 was prepared by a one-pot hydrothermal method and characterized by SAXRD, N2 adsorption-desorption, SEM, UV–Vis DR, and FTIR spectroscopy. The results revealed that the prepared 3% Co-MCM-41 possessed mesoporous structure with BET surface areas at around 898.5 m2g−1. The adsorption performance of 3% Co-MCM-41 toward levofloxacin (LVF) was investigated by batch experiments. The adsorption of LVF on 3% Co-MCM-41 was very fast and reached equilibrium within 2 h. The adsorption kinetics followed the pseudo-second-order kinetic model with the second-order rate constants in the range of 0.00198–0.00391 g mg−1 min−1. The adsorption isotherms could be well represented by the Langmuir, Freundlich, and Dubinin-Radushkevich (D-R) isotherm equations. Nevertheless, D-R isotherm provided the best fit based on the coefficient of determination and average relative error values. The mean free energy of adsorption (E) calculated from D-R model was about 11 kJ mol−1, indicating that the adsorption was mainly governed by a chemisorption process. Moreover, the adsorption capacity was investigated as a function of pH, adsorbent dosage, LVF concentration, and temperature with help of respond surface methodology (RSM). A quadratic model was established, and an optimal condition was obtained as follows: pH 8.5, adsorbent dosage of 1 g L−1, initial LVF concentration of 119.8 mg L−1, and temperature of 31.6 °C. Under the optimal condition, the adsorption capacity of 3% Co-MCM-41 to LVF could reach about 108.1 mg g−1. The solution pH, adsorbent dosage, LVF concentration, and a combination of adsorbent dose and LVF concentration were significant factors affecting the adsorption process. The adsorption thermodynamic functions were also determined. The negative ΔH 0 (−33.50 kJ mol−1) and ΔS 0 (−43.57 J mol−1 K−1) suggested that the adsorption was an exothermic process accompanied by decreasing disorder. This study may indicate that 3% Co-MCM-41 is a promising adsorbent for removing emerging pollutants of LVF from water.Keywords
Funding Information
- NFFTBS (No.J1103311 and No.J1210057)
- Open Funding Project of State Key Laboratory Base of Eco-Hydraulic Engineering in Arid Area, Xi’an University of Technology (No. 2016KFKT-3)
This publication has 52 references indexed in Scilit:
- Optimization of a cationic dye removal by a chemically modified agriculture by-product using response surface methodology: biomasses characterization and adsorption propertiesEnvironmental Science and Pollution Research, 2016
- Water Treatment by Adsorption Columns: Evaluation at Ground LevelSeparation & Purification Reviews, 2013
- Low cost adsorbents for the removal of organic pollutants from wastewaterJournal of Environmental Management, 2012
- New Generation Adsorbents for Water TreatmentChemical Reviews, 2012
- Adsorption of ciprofloxacin on surface-modified carbon materialsWater Research, 2011
- The Quest for Active Carbon Adsorbent Substitutes: Inexpensive Adsorbents for Toxic Metal Ions Removal from WastewaterSeparation & Purification Reviews, 2010
- Aqueous heavy metals removal on amine-functionalized Si-MCM-41 and Si-MCM-48Journal of Hazardous Materials, 2009
- Biosorption of nickel(II) from aqueous solution by Aspergillus niger: Response surface methodology and isotherm studyChemosphere, 2009
- Evaluation of thermodynamic properties of sorption of 2,4-D and atrazine by tire rubber granulesSeparation and Purification Technology, 2005
- Effects of 25 pharmaceutical compounds to Lemna gibba using a seven-day static-renewal testEnvironmental Toxicology and Chemistry, 2004