Dry sliding wear behavior of Saffil fiber-reinforced Mg-10Gd-3Y-0.5Zr magnesium alloy-based composites
- 7 December 2010
- journal article
- other
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 45 (6) , 683-693
Abstract
Dry sliding wear behavior of the creep-resistant magnesium alloy Mg-10Gd-3Y-0.5Zr and its composites have been investigated in this study. Magnesium matrix composites are prepared by squeezing casting infiltration of Mg alloy into Saffil preforms. Wear tests are conducted using ball-on-flat sliding wear set up under a sliding velocity range of 1-15 cm/s and at an applied load range of 1-8 N for a constant sliding distance of 150 m. According to results, mechanical and wear-resistance properties of magnesium alloy improved by introducing Saffil fibers, and the alumina binder composite has a higher strength and lower wear rate than silica binder composite. The wear rates of the matrix alloy, composites and their counter-face balls increase with increasing applied load. The increment of sliding velocities decreases the wear rate of the matrix alloy under the tested sliding velocities. A critical threshold of sliding velocity for the wear rate of both composites and their counter-faces is about 9 cm/s. Abrasion and plastic deformation are considered to be the dominant mechanism for the matrix alloy in tested conditions, and for both composites under low sliding velocity (<10 cm/s) and at low applied loads (1-5 N). Delamination is the wear mechanism of the silica binder composites at a high applied load (8 N). Adhesion and oxidation are the controlling wear mechanism of matrix alloy and composites under a sliding velocity of 15 cm/s.Keywords
This publication has 24 references indexed in Scilit:
- Microstructure and strengthening mechanism of high strength Mg–10Gd–2Y–0.5Zr alloyJournal of Alloys and Compounds, 2007
- Dry sliding wear behavior of SiCP/QE22 magnesium alloy matrix compositesMaterials Science and Engineering: A, 2006
- Evaluation of sliding wear behavior of graphite particle-containing magnesium alloy compositesTransactions of Nonferrous Metals Society of China, 2006
- Metal Matrix Composites2006
- Precipitation in a Mg–10Gd–3Y–0.4Zr (wt.%) alloy during isothermal ageing at 250°CJournal of Alloys and Compounds, 2006
- Wear of magnesium composites reinforced with nano-sized alumina particulatesWear, 2005
- Effect of fibre-orientation on friction and wear properties of Al2O3 and carbon short fibres reinforced AlSi12CuMgNi hybrid compositesWear, 2003
- Dry sliding wear behavior of Al O fiber reinforced aluminum compositesComposites Science and Technology, 2000
- Dry sliding wear of discontinuously reinforced aluminum composites: review and discussionWear, 1995
- Anisotropic wear of planar-random metal matrix composites with zinc alloy matrixWear, 1991