Design of A GaN Based High Frequency Inverter for Electrosurgery
Open Access
- 24 January 2025
- journal article
- research article
- Published by Politeknik Dergisi in Journal of Polytechnic
- Vol. 28 (1) , 67-76
Abstract
Electrosurgery performs cutting and coagulation procedures using high energy and high frequency electric current. It reduces bleeding during surgical interventions, shortens the operation time and accelerates the healing process. In this study, a GaN based high frequency full bridge class DE resonant inverter design is proposed for use in electrosurgery. The proposed inverter provides AC voltage at high frequencies and the switches operate with ZVS (Zero Voltage Switching) at low voltage stress. In addition, the use of GaN elements provides high efficiency and high-power density. The operating frequency is selected as 500 kHz for three different cutting modes of electrosurgery. After the technical analysis and simulation studies of the high frequency class DE resonant inverter, an experimental setup was designed and implemented in a laboratory environment. The efficiency performance over a variable load range is analysed. Finally, pure cutting, blend and coagulation modes are tested on the different loads, potato - chicken breast - liver, simulating real tissue. On the potato load for pure cutting mode, the output voltage is 39.9 V and the output current is 0.7 A while an efficiency of 35%.Keywords
Funding Information
- Pamukkale University (2022FEBE042)
This publication has 28 references indexed in Scilit:
- Efficiency Performance Evaluation of A Second Stage GaN Based High Frequency Inverter for Electrosurgery2023
- Analog Resistive Sensing Control for GaN FET’s based Totem Pole PFC2023
- Electrosurgery Power Electronics: A Revolution in the Making2023
- Multiphase Interleaved Reconfigurable High-Frequency-Voltage Inverter for Electrosurgical Generator2022
- GaN-HEMT Based Very-High-Frequency AC Power Supply for Electrosurgery2021
- A review of GaN HEMT broadband power amplifiersAEU - International Journal of Electronics and Communications, 2020
- Materials and processing issues in vertical GaN power electronicsMaterials Science in Semiconductor Processing, 2018
- Arduino based module for return electrode contact quality monitoring in the electrosurgical instruments2017
- Modeling and digital control of LCLC resonant inverter with varying load2011
- The evolutionary state of electrosurgery: where are we now?Current Opinion in Obstetrics and Gynecology, 2008