Pulse Electropolishing of Metal AM Surfaces

Authors:

Abstract
Laser powder bed fusion (LPBF) of metal produces extremely rough as-printed surfaces, which can negatively impact material quality and performance including corrosion and mechanical response. Depending on the material and the build angle, the arithmetical mean surface roughness (Sa) can range from 5 – 50 um. These values do not meet the typically required roughness specification (Sa » 0.8 um = 32 uin); in many cases, machining or mechanical grinding is impractical due to the complex surface geometries. Our team has focused on using pulse electropolishing methods that have been shown to reduce the overall surface roughness while maintaining the part geometry. Low hazard electrolytes have been identified for 316L stainless steel (SS) and Ti64. In this talk, we will describe how we optimized the pulse electropolishing parameter and electrolyte for 316L SS and Ti64. To achieve this, we have optimized how each pulse parameter affects the surface finish of the material and then used this information to build an electropolishing recipe that could target the different roughness scales of the material. For both 316L SS and Ti64, we have shown that we can significantly reduce the surface roughness of these materials, as shown in Fig. 1. Furthermore, we have demonstrated that this process can be applied to complex geometries. 3D images of samples before and after electropolishing demonstrate the uniformity of this process. Figure 1