Effect of Nd on Stacking Fault Energy in Pure Copper: A First-Principles and HRTEM Study
Open Access
Abstract
Stacking fault energy (SFE) can significantly affect the plastic deformation mechanism of metal materials and then affect their mechanical properties. Changing the stacking fault energy by microalloying rare earth elements is an effective means to control the plastic deformation mechanism and optimize the mechanical properties of the metal materials. Based on first principles, the HRTEM technique and GPA method, the effects of Nd content on the SFE and microstructure of Cu alloys were studied. The results show that the Nd element can significantly reduce the SFE of pure copper. But the change in the Nd element content has little influence on the SFE of the alloy. In addition, with the increase in Nd content, the grain size and twin size are refined. The GPA results show that strong tensile strain is formed inside the twin, and alternating tensile strain and compressive strain structures are formed on the (-11-1) plane at the tip of the twin.Keywords
Funding Information
- Institute 52, Collaborative Funding Initiatives (NBFJ2022-29, 2021GG0273, LQ22E010007)
- Inner Mongolia key technology research project (NBFJ2022-29, 2021GG0273, LQ22E010007)
- Zhejiang Provincial Natural Science Foundation of China (NBFJ2022-29, 2021GG0273, LQ22E010007)
This publication has 24 references indexed in Scilit:
- Effects of Sc doping on microstructure and properties of high strength and high conductivity Cu-6 wt%Ag alloy wires with large section size for ultra-high pulsed magnet coilsMaterials Science and Engineering: A, 2025
- Refinement of eutectic structure and precipitates of Cu–20Ag alloy due to Y microalloyingJournal of Materials Research and Technology, 2024
- Oxide precipitation strengthening in Cu alloy modified with trace amounts of Nd during dynamic impactMaterials Letters, 2024
- Influence of rare earth elements (Y, La and Ce) on the mechanical properties and oxidation resistance of nickel-based superalloys: A critical reviewJournal of Materials Science & Technology, 2024
- Synergistic improvement of mechanical properties and electrical conductivity of Cu-Fe alloys by rare earth metals Sc and Y additionJournal of Alloys and Compounds, 2024
- Effect of Nd addition on the microstructure, mechanical properties, shape memory effect and corrosion behaviour of Cu–Al–Ni high-temperature shape memory alloysJournal of Alloys and Compounds, 2021
- Effects of minor rare earths on the microstructure and properties of Cu-Cr-Zr alloyJournal of Alloys and Compounds, 2020
- Effects of yttrium addition on grain boundary character distribution and stacking fault probabilities of 90Cu10Ni alloyMaterials Characterization, 2019
- Properties of rare earth added Cu–12wt%Al–3wt%Ni–0.6wt%Ti high temperature shape memory alloyMaterials Science and Engineering: A, 2019
- Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis setComputational Materials Science, 1996