Analysis of Influencing Factors and Operation Quality Evaluation Strategy of Straw Crushing and Scattering System
Open Access
- 3 April 2022
- journal article
- research article
- Published by MDPI AG in Agriculture
- Vol. 12 (4) , 508
Abstract
First, through a single factor test, it was determined that the conveying and feeding speed range was 0.9~1.5 m/s, the rotating speed range of straw chopper shaft was 1900~2300 r/min, and the moisture content of straw was 26~34%. Then the Box–Behnken experimental design method was adopted, with conveying and feeding speed, cutter shaft rotation speed, and straw moisture content as influencing factors; small and stable specific power consumption and maximum coverage uniformity are taken as evaluation indexes. The influence rules of various factors on operation indexes were analyzed, and response surface analysis was carried out. Further, the optimization function in Design-Expert12.0 was used to determine the optimal parameter combination as follows: Conveying and feeding speed of 0.8 m/s, rotating speed of cutter shaft of 2059.9 r/min, moisture content of straw of 30.7%, corresponding specific power consumption and coverage uniformity of 1163 J/s2 and 99.1%, respectively. Finally, the seeding system was mounted behind the straw crushing and scattering system for a field verification test. The results showed that when the crushing and scattering system of the whole machine operates with the design parameters, the specific power consumption was 1260 J/s2, the uniformity of straw coverage was 94.7%, and the error with the experimental value was less than 5%. The effect was better than the standard requirement. The test realized the crushing and uniform coverage of high-quality straw residues after rice harvest, which proved the scientific and reliable test-bed of the crushing and scattering system.Keywords
Funding Information
- Jiangsu Agricultural Science and Technology Innovation Fund (CX (20)3066)
- National Natural Science Foundation of China (31901418)
- National Peanut Industry Technology System (CARS-13)
This publication has 5 references indexed in Scilit:
- Uniformity Detection for Straws Based on Overlapping Region AnalysisAgriculture, 2022
- Effects of Biochar and Straw Application on the Physicochemical and Biological Properties of Paddy Soils in Northeast ChinaScientific Reports, 2019
- Numerical simulation and field tests of minimum-tillage planter with straw smashing and strip laying based on EDEM softwareComputers and Electronics in Agriculture, 2019
- Straw mulching is more important than no tillage in yield improvement on the Chinese Loess PlateauSoil and Tillage Research, 2019
- A review on weed detection using ground-based machine vision and image processing techniquesComputers and Electronics in Agriculture, 2019