Effect of maleated polypropylene on the performance of polypropylene/cellulose composite
- 30 March 2005
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 26 (4) , 448-453
Abstract
Composites consisting of a polypropylene (PP) and highly crystalline cellulosic microfibers were prepared by melting mixing with the maleic anhydride grafted polypropylene (MAPP) as a compatibilizer. The results show that even with addition of a small amount of MAPP, the mechanical properties of the composites improved dramatically. The improvement is attributed to stronger interfacial adhesion caused by esterification between anhydride groups of MAPP and hydroxyl groups of cellulose, although the number of the ester bonds is too few to be detected by FT‐IR spectroscopy. It was also found that tensile strength and Young's modulus increased with the increasing MAPP contents in the composites, and the optimum MAPP content is about 10 wt% for the composite with cellulose content of 30 wt%. SEM indicated that the interfacial adhesion between cellulose fibers and PP improved in MAPP‐containing composites. The DSC results showed that MAPP has little effect on melting and crystallization temperatures of PP in the composites. POLYM. COMPOS., 26:448–453, 2005. © 2005 Society of Plastics EngineersKeywords
This publication has 40 references indexed in Scilit:
- Surface treated cellulose fibres in flame retarded PP compositesMacromolecular Symposia, 2003
- Preparation and characteristics of composites of high‐crystalline cellulose with polypropylene: Effects of maleated polypropylene and cellulose contentJournal of Applied Polymer Science, 2002
- Advanced environment‐friendly polymer materialsPolymers for Advanced Technologies, 2002
- Preparation and mechanical properties of composite of fibrous cellulose and maleated polyethyleneJournal of Applied Polymer Science, 2002
- A review on interface modification and characterization of natural fiber reinforced plastic compositesPolymer Engineering & Science, 2001
- Plasticized starch–cellulose interactions in polysaccharide compositesPolymer, 2001
- Effect of adding steam-exploded wood flour to thermoplastic polymer/wood compositeJournal of Wood Science, 2000
- Properties and modification methods for vegetable fibers for natural fiber compositesJournal of Applied Polymer Science, 1996
- Infrared spectroscopy studies of the effects of the catalyst on the ester cross‐linking of cellulose by poly(carboxylic acids)Journal of Applied Polymer Science, 1993
- Influence of maleic anhydride as a coupling agent on the performance of wood fiber‐polystyrene compositesPolymer Engineering & Science, 1991