Characterization of the strain rate dependent behavior of nanocrystalline gold films
Authors:
- 31 January 2008
- journal article
- Published by Springer Nature in Journal of Materials Research
- Vol. 23 (1) , 55-65
Abstract
The strain rate dependence of freestanding, nanocrystalline gold films was evaluated by a microtensile technique with applied strain rates on the order of 10−4 to 10−6 s−1. Film thickness ranged from 0.25 to 1.00 μm with corresponding grain sizes of 40 to 100 nm. The plastic properties were found to be particularly sensitive to strain rate, film thickness, and grain size, while the elastic property remained relatively unchanged. The thinner films exhibited significant strain rate sensitivity, while the thicker film exhibited only marginal changes. Hall–Petch boundary hardening was observed and dominated plastic flow at larger strain rates, while diffusion-controlled deformation mechanisms appeared to be activated with increasing influence as strain rate decreased. Analysis of dislocation-based and grain-boundary diffusion-related creep suggested that the films were likely experiencing power-law creep as the dominant deformation mechanism in this grain size regime at lower strain rates.Keywords
This publication has 57 references indexed in Scilit:
- An investigation of nanoindentation creep in polycrystalline Cu thin filmMaterials Letters, 2004
- Creep of thin film Au on bimaterial Au/Si microcantileversActa Materialia, 2004
- Strain Rate Dependent Behavior of Pure Aluminum and Copper Micro-WiresMRS Proceedings, 2001
- Direct observation of diffusional creep via TEM in polycrystalline thin films of goldActa Materialia, 1998
- Creep of nanocrystalline Cu, Pd, and Al-ZrNanostructured Materials, 1997
- Effect of grain size on mechanical properties of nanocrystalline materialsActa Metallurgica et Materialia, 1995
- Creep of nanocrystalline NiP alloyScripta Metallurgica et Materialia, 1994
- On the power-law creep equationScripta Metallurgica, 1980
- Mechanical properties of dental gold thin filmsThin Solid Films, 1976
- On the empirical constants in the dorn equationScripta Metallurgica, 1973