Electroacoustic Comparison and Optimization of Low-Power Impulse Sound-Source Needle Series Electrodes
Open Access
Abstract
The high-power drive of an impulse sound source with drilling makes the system’s life short and difficult to integrate. This report firstly establishes the pulse discharge experimental system and finite element model, and compares and verifies the typical parameters. Second, the study examines how the energy storage capacitor’s charging voltage, discharge electrode gap, and liquid environment conductivity influence the electroacoustic performance of needle series electrodes. Subsequently, the optimal electrode configuration is identified under power constraints, yielding electroacoustic parameters and curves suitable for low-power impulsive sound sources. The findings reveal that the needle–plate electrode outperforms others in pre-breakdown duration, peak impulse wave strength, highest sound pressure level, and electroacoustic conversion efficiency. However, its higher power demand can be mitigated by lowering the charging voltage and narrowing the electrode gap. The charging voltage of the power-limited needle–plate electrode is only 3.5 kV, the impulse wave intensity reaches 1.27 MPa, and the peak system power is effectively controlled within 6.66 kW. A stable 288 dB SPL output is maintained up to 1 kHz, and above 250 dB in the wide bandwidth of 1–100 kHz. Needle–plate electrodes provide broadband excitation and high intensity SPL output despite power limitations.Keywords
Funding Information
- National Natural Science Foundation of China (51874238)
This publication has 36 references indexed in Scilit:
- New method for logging identification of natural fractures in shale reservoirs: The Fengcheng formation of the Mahu Sag, ChinaMarine and Petroleum Geology, 2025
- Experimental study on the discharge characteristics of high-voltage nanosecond pulsed discharges and its effect on the ignition and combustion processesApplied Energy, 2024
- Radial ablation uniformity of cathode and design of double anode micro-cathode arc thrusterActa Astronautica, 2024
- A solid-state pulse power sub-nanosecond SiC DSRD-based generator with high-voltage and high repetition frequency for pulse discharge water treatmentEnvironmental Research, 2024
- Oscillation suppression for pulsed arc electrohydraulic discharges based on plasma impedance modelJournal of Electrostatics, 2024
- Inversion of radial formation velocity distribution based on monopole acoustic logging while drillingGeoenergy Science and Engineering, 2023
- The Role of High Voltage Electrode Material in the Inactivation of E. coli by Direct-in-Liquid Electrical Discharge PlasmaPlasma Chemistry and Plasma Processing, 2019
- Super-resolution imaging of low-frequency sound sources using a corrected monopole time reversal methodJournal of Sound and Vibration, 2017
- A method for testing phased array acoustic Doppler velocity log on landApplied Acoustics, 2016
- Fracture identification based on remote detection acoustic reflection loggingApplied Geophysics, 2015