Thermal Stability of Potassium-Promoted Cobalt Molybdenum Nitride Catalysts for Ammonia Synthesis
Open Access
Abstract
The application of cobalt molybdenum nitrides as ammonia synthesis catalysts requires further development of the optimal promoter system, which enhances not only the activity but also the stability of the catalysts. To do so, elucidating the influence of the addition of alkali metals on the structural properties of the catalysts is essential. In this study, potassium-promoted cobalt molybdenum nitrides were synthesized by impregnation of the precursor CoMoO4·3/4H2O with aqueous KNO3 solution followed by ammonolysis. The catalysts were characterized with the use of XRD and BET methods, under two conditions: as obtained and after the thermal stability test. The catalytic activity in the synthesis of ammonia was examined at 450 °C, under 10 MPa. The thermal stability test was carried out by heating at 650 °C in the same apparatus. As a result of ammonolysis, mixtures of two phases: Co3Mo3N and Co2Mo3N were obtained. The phase concentrations were affected by potassium admixture. The catalytical activity increased for the most active catalyst by approximately 50% compared to non-promoted cobalt molybdenum nitrides. The thermal stability test resulted in a loss of activity, on average, of 30%. Deactivation was caused by the collapse of the porous structure, which is attributed to the conversion of the Co2Mo3N phase to the Co3Mo3N phase.Keywords
Funding Information
- Narodowe Centrum Badań i Rozwoju (LIDER/10/0039/L-10/18/NCBR/2019)
- Narodowym Centrum Nauki (2019/35/O/ST5/02500)
This publication has 41 references indexed in Scilit:
- Ammonia synthesis over cobalt catalysts doped with cerium and barium. Effect of the ceria loadingApplied Catalysis A: General, 2012
- Promotion of Binary Nitride Catalysts: Isothermal N2 Adsorption, Microkinetic Model, and Catalytic Ammonia Synthesis ActivityJournal of Catalysis, 2002
- Cobalt molybdenum bimetallic nitride catalysts for ammonia synthesisApplied Catalysis A: General, 2001
- Cobalt molybdenum bimetallic nitride catalysts for ammonia synthesisApplied Catalysis A: General, 2001
- Cobalt molybdenum bimetallic nitride catalysts for ammonia synthesisApplied Catalysis A: General, 2001
- Characterization and HDS Activity of Cobalt Molybdenum NitridesThe Journal of Physical Chemistry B, 2001
- Chemistry of interstitial molybdenum ternary nitrides MnMo3N (M=Fe, Co, n=3; M=Ni, n=2)Journal of Materials Chemistry, 1998
- Molybdenum nitride catalystsJournal of Catalysis, 1994
- Influence of aluminium and potassium on activity and texture of fused iron Catalysts for ammonia synthesisApplied Catalysis A: General, 1992
- The influence of structural promoters on the surface properties of reduced magnetite catalystsJournal of Catalysis, 1966