Effects of Surface Area on All-Solid-Stated pH Sensor Based on Antimony Electrode
Authors:
- 7 October 2019
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 20 (2) , 680-688
Abstract
To realize the on-line and in situ pH detection in soilless culture, a new all-solid-stated pH sensor was presented. The pH sensor consisted of alumina ceramic (Al 2 O 3 ) substrate, Sb/Sb 2 O 3 working electrode, Ag/AgCl reference electrode, Ag lead and pad. Sb thin film and Ag thin film were obtained by magnetron sputtering method, and then thermal annealing and Nafion modification was conducted to improve the performance of the sensor. Moreover, the influence of surface area of Sb electrode on the performance of pH sensor was investigated with the area of 4 mm 2 , 9 mm 2 , 16 mm2, 25 mm 2 and 36 mm 2 , respectively. Through surface morphology analysis, energy spectrum analysis and electrochemical experiments, the pH sensor, which Sb electrode surface area is 16 mm 2 , shows excellent comprehensive performance, with high sensitivity (67.3 mV/pH), short response time (less than 3.5 s), good stability (standard deviation less than 2 mV in 700 s period), low hysteresis (less than 1.63 mV) and low drift rate (less than 1.62 mV/h). The developed sensor can be applied in pH detection in soilless culture and is promising to popularize in industrial production.Keywords
Funding Information
- National Key Technology R&D Program of China (2014BAD08B04)
- Special Fund for Agro-scientific Research in the Public Interest (201203095)
- Innovation Project for Graduate Student Research of Jiangsu Province of China (KYLX15_1055)
This publication has 32 references indexed in Scilit:
- The effects of sensing electrode thickness on ruthenium oxide thin-film pH sensorSensors and Actuators A: Physical, 2014
- Iridium oxide-based chemical sensor for in situ pH measurement of oilfield-produced water under subsurface conditionsIonics, 2014
- High-sensitivity pH sensor employing a sub-micron ruthenium oxide thin-film in conjunction with a thick reference electrodeSensors and Actuators A: Physical, 2013
- Performance of miniaturised thick-film solid state pH sensorsSensors and Actuators A: Physical, 2013
- A flexible pH sensor based on the iridium oxide sensing filmSensors and Actuators A: Physical, 2011
- Functional electrochemically-active ultra-thin Nafion filmsColloids and Surfaces A: Physicochemical and Engineering Aspects, 2008
- pH Sensitivity Improvement on 8 nm Thick Hafnium Oxide by Post Deposition AnnealingElectrochemical and Solid-State Letters, 2006
- Electrochemical Methods: Fundamentals and ApplicationsAnti-Corrosion Methods and Materials, 2003
- A solid-state pH sensor based on a Nafion-coated iridium oxide indicator electrode and a polymer-based silver chloride reference electrodeSensors and Actuators B: Chemical, 1994
- The role of buried OH sites in the response mechanism of inorganic-gate pH-sensitive ISFETsSensors and Actuators, 1984