Micro-Structural Characterization and Semi Quantitative Chemical Analysis of Ferrite and Austenite Phases in Duplex Stainless Steels
Authors:
Preprint
- 3 January 2019
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
The PREN value of the alloy may lead to a misleading prediction of pitting corrosion resistance because in the event of an imbalance of δ ferrite and austenite volume fraction, by Quantitative metallographic analyzes. In this work three laminated duplex stainless steels with different PRENs were characterized: UNS S32304 (Lean Duplex), UNS S31803 (Duplex) and UNS S32750 (Super Duplex), where several techniques of microstructural analysis were used, such as optical emission spectrometry, optical microscopy and scanning electron microscopy/EDS. For all the alloys studied, it was observed that the δ ferrite phase presents higher Cr and Mo contents than the austenite phase, which in turn had Ni contents higher than the δ ferrite. Therefore we can observe that the PRENN values for the Super Duplex alloy were generally higher, as well as in the ferritic and austenitic phase, at a level of 12.25% in relation to Duplex, and more than 50% higher than Lean Duplex, which leads to the definition of the alloy having greater resistance to pitting corrosion.Keywords
This publication has 12 references indexed in Scilit:
- Anais do Enemet - Encontro Nacional de Estudantes de Engenharia Metalúrgica, de Materiais e de Minas2017
- Influence of sensitization on microstructure and passive property of AISI 2205 duplex stainless steelCorrosion Science, 2016
- SIGNIFICANT INCREASE IN THE HARDNESS OF THE FERRITIC PHASE DUE TO STRUCTURAL CHANGES AT LOW TEMPERATURES IN DUPLEX STAINLESS STEELSMechanics, 2013
- Delta Ferrite Formation in Austenitic Stainless Steel CastingsMaterials Science Forum, 2012
- Intermetallic Phase Precipitation in Duplex Stainless Steels during High Temperature ExpositionMaterials Science Forum, 2010
- Test Method for Determining Volume Fraction by Systematic Manual Point Count2008
- Test Method for Optical Emission Vacuum Spectrometric Analysis of Blast Furnace Iron by the Point-to-Plane Technique2008
- Effect of intermetallic precipitations on the properties of duplex stainless steelMaterials Characterization, 2007
- The effect of nitrogen and heat treatment on the microstructure and tensile properties of 25Cr–7Ni–1.5Mo–3W–xN duplex stainless steel castingsMaterials Science and Engineering: A, 2001
- Duplex stainless steels1997