Application of Operating Deflection Shapes to the Vibration-Based Mechanical Condition Monitoring of Power Transformer Windings
- 4 September 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Delivery
- Vol. 36 (4) , 2164-2173
Abstract
Operating deflection shapes (ODSs) are used for visualizing the vibration patterns of a structure. In this study, ODSs are applied to diagnose the mechanical condition of power transformer windings. First, a synchronous calibration measuring system is developed to simultaneously acquire tank vibration signals and excitation voltage signals. To perform the synchronous calibration, the phase of the excitation voltage signals is set as the reference. Next, the no-load test, load test, and variable load test are conducted on a 50-kVA transformer. The histogram of oriented gradient (HOG) and Pearson correlation coefficient (CC) are proposed to describe the differences between the different ODSs. Experimental results show that the ODSs are insensitive to the operating voltage and current, but sensitive to the clamping pressure of the windings. Field results further verify the significant change in the ODS after winding deformation. Finally, the partial ODS, which is suitable for practical transformers, is proposed to locate winding mechanical defects in power transformers. The proposed method can improve the efficiency and accuracy of the vibration-based mechanical condition monitoring of power transformers.Keywords
Funding Information
- National Natural Science Foundation of China (U1766223, U1866603)
This publication has 13 references indexed in Scilit:
- A simple damage detection indicator using operational deflection shapesMechanical Systems and Signal Processing, 2016
- A study of the sweep frequency impedance method and its application in the detection of internal winding short circuit faults in power transformersIEEE Transactions on Dielectrics and Electrical Insulation, 2015
- Introduction to Operational Modal Analysis2015
- Comparison of Mechanically and Electrically Excited Vibration Frequency Responses of a Small Distribution TransformerIEEE Transactions on Power Delivery, 2015
- Modal parameters identification of power transformer winding based on improved Empirical Mode Decomposition methodElectric Power Systems Research, 2014
- Frequency response analysis and short-circuit impedance measurement in detection of winding deformation within power transformersIEEE Electrical Insulation Magazine, 2013
- Transformer Tank Vibration Modeling as a Method of Detecting Winding Deformations—Part I: Theoretical FoundationIEEE Transactions on Power Delivery, 2005
- Transformer Tank Vibration Modeling as a Method of Detecting Winding Deformations—Part II: Experimental VerificationIEEE Transactions on Power Delivery, 2005
- Histograms of Oriented Gradients for Human Detection2005
- Relevance of magnetostriction and forces for the generation of audible noise of transformer coresIEEE Transactions on Magnetics, 2000