Characteristics of pulsed power generator by versatile inductive voltage adder
Authors:
- 1 October 2005
- journal article
- Published by Cambridge University Press (CUP) in Laser and Particle Beams
- Vol. 23 (4) , 573-581
Abstract
A pulsed power generator by inductive voltage adder, versatile inductive voltage adder (VIVA-I), which features a high average potential gradient (2.5 MV/m), was designed and is currently in operation,. It was designed to produce an output pulse of 4 MV/60 ns by adding 2 MV pulses in two-stages of induction cells, where amorphous cores are installed. As a pulse forming line, we used a Blumlein line with the switching reversed, where cores are automatically biased due to the presence of prepulse. Good reproducibility was obtained even in the absence of the reset pulse. Within [similar]40% of full charge voltage, pulsed power characteristics of Marx generator, pulse forming line (PFL), transmission line (TL), and induction cells were tested for three types of loads; open-circuit, dummy load of liquid (CuSO4) resistor, and electron beam diode. In the open-circuit test, [similar]2.0 MV of output voltage was obtained with good reproducibility. Dependences of output voltage on diode impedances were evaluated by using various dummy loads, and the results were found as expected. An electron-beam diode was operated successfully, and [similar]18 kA of beam current was obtained at the diode voltage of [similar]1 MV.Keywords
This publication has 6 references indexed in Scilit:
- Developments in inertial fusion energy and beam fusion at magnetic confinementLaser and Particle Beams, 2004
- Primary energy storages based on linear transformer stagesLaser and Particle Beams, 2003
- Repetitively pulsed high-current accelerators with transformer charging of forming linesLaser and Particle Beams, 2003
- Guest Editor's ForewordLaser and Particle Beams, 2003
- Production and application of low-energy, high-current electron beamsLaser and Particle Beams, 2003
- High-power, short-pulse generators based on induction voltage addersProceedings of the IEEE, 1992