Performance Assessment of Low-Saturated Hydraulic Conductivity Barriers Made of Clay and Clay-Amended Materials for Mine Site Reclamation

Authors:
Open Access
Publisher website
Google Scholar
Abstract
Low-saturated hydraulic conductivity covers (LSHCC) or hydraulic barriers are one of the reclamation techniques used to control the acid mine drainage generation (AMD). These covers are intended to limit the infiltration of water into reactive tailings. Compacted clays are among the materials used as LSHCC. The performance of clay-based hydraulic barriers can be affected by their geotechnical and hydrogeological properties. Freeze–thaw cycles can increase their saturated hydraulic conductivity (ksat). However, these effects can be minimized by adding amendments. To evaluate the performance of these clay-based covers, four field experimental cells were built. The first one simulates a cover composed entirely of clay, the second a clay–silt mixture, the third a clay–sand mixture and the last two layers of clay with an intermediate layer of silt. Each cell has been equipped with a monitoring station with continuous measurements of volumetric water content, suction and temperature. In situ permeability tests were also conducted to assess field hydraulic conductivity. Numerical simulations were also conducted to evaluate the water balance for each cover scenario. The laboratory results showed low-saturated hydraulic conductivity values meeting waterproofing criteria, whereas field measurements and calibrated model values were consistently higher and exceeded the waterproofing criteria. Infiltration monitoring indicated that 15 to 40% of precipitation infiltrated the covers, with possible overestimation due to preferential flow. Discrepancies between laboratory and field-saturated hydraulic conductivity values were mainly attributed to inadequate compaction, unfavorable weather conditions, and excessive water content during cover installation. Variations in saturated hydraulic conductivity over time were generally within statistical variability, although differences among cells and responses to wetting–drying cycles highlight the influence of construction conditions on field performance.
Funding Information
  • Fonds de Recherche du Québec sur la Nature et les Technologies (284 637)
  • Mitacs
  • UQAT
  • industrial partner Fonderie Horne

This publication has 35 references indexed in Scilit: