Identifying the impact of methanol-diesel fuel on the environment using a four-stroke CI engine
Authors:
Open Access
- 1 January 2023
- journal article
- research article
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Journal of Applied Engineering Science
- Vol. 21 (2) , 188-193
Abstract
This work aims to investigate the influence of blending diesel fuel with different percentages of methyl alcohol on reducing the emission of exhaust gases. The study was performed using a laboratory diesel engine, which is an internal combustion, single-cylinder, and four-strokes engine. The study involved investigating three volume percentages of methyl alcohol (methanol), which are 7, 14, and 21. The emission results of the blending fuels were compared with that of non-blending fuel. The analysis of the exhaust gases was done under three engine loads, which are two, four, and six N.m, with a constant speed of 2000 rpm. The analysis involves measuring carbon oxides (CO and CO2), unburned hydrocarbons (HC), nitrogen oxides (NOx), and particulate matter (PM). The results showed a positive impact of methanol on reducing the emission of all gases except NOx. Increasing the methanol ratio increases the reduction of the emissions of CO, CO2, PM, and HC, where the highest reductions of the gaseous emissions were observed with the percentage of 21% of methanol under all engine loads. Specifically, the drop recorded by using 21% of methanol was 69-83% for CO, 60-69% for CO2, 80-83% for HC, and 25-30% for PM. These reductions in emissions are assigned to the high oxygen content of methyl alcohol that influences the complete combustion of diesel. On the other hand, the NOx emission increased by 135-346%, but a possible reduction in these emissions can be achieved through a proper engine modification. The results of this investigation provide essential insights that would inspire using methanol as a fuel additive with modifying the diesel engines to be compatible with blending fuel.Keywords
This publication has 17 references indexed in Scilit:
- Experimental comparative assessment of butanol or ethanol diesel-fuel extenders impact on combustion features, cyclic irregularity, and regulated emissions balance in heavy-duty diesel engineEnergy, 2019
- An experimental study on combustion performance and flame spread characteristics over liquid diesel and ethanol-diesel blended fuelEnergy, 2019
- An experimental study of the performance and emissions of spark ignition gasoline engineInternational Journal of Automotive and Mechanical Engineering, 2016
- HC, CO, CO2 and NOx Emission Evaluation of a Diesel Engine Fueled with Waste Frying Oil Methyl EsterProcedia - Social and Behavioral Sciences, 2013
- Emissions characteristics of spark ignition engine operating on lower–higher molecular mass alcohol blended gasoline fuelsRenewable Energy, 2013
- Biodiesel from cotton seed oil and its effect on engine performance and exhaust emissionsApplied Thermal Engineering, 2009
- The impact of using biodiesel/marine gas oil blends on exhaust emissions from a stationary diesel engineJournal of Environmental Science and Health, Part A, 2008
- Experimental determination of suitable ethanol–gasoline blend rate at high compression ratio for gasoline engineApplied Thermal Engineering, 2008
- An experimental study on the performance parameters of an experimental CI engine fueled with diesel–methanol–dodecanol blendsFuel, 2008
- Study of spark ignition engine fueled with methanol/gasoline fuel blendsApplied Thermal Engineering, 2007