Tensile Behavior, Constitutive Model, and Deformation Mechanisms of MarBN Steel at Various Temperatures and Strain Rates
Open Access
Abstract
To reduce harmful gas emission and improve the operational efficiency, advanced ultra-supercritical power plants put forward higher requirements on the high temperature mechanical properties of applied materials. In this paper, the tensile behavior and deformation mechanisms of MarBN steel are discussed at different strain rates (5 × 10−3 s−1, 5 × 10−4 s−1, and 5 × 10−5 s−1) under room temperature and 630 °C. The results show that the tensile behavior of the alloy is dependent on temperature and strain rate, which derived from the balance between the average dislocation velocity and dislocation density. Furthermore, observed dynamic recrystallized grains under severe deformation reveal the existence of dynamic recovery at 630 °C, which increases the elongation compared to room temperature. Finally, three typical constitutive equations are used to quantitatively describe the tensile deformation behavior of MarBN steel under different strain rates and temperatures. Meanwhile, the constitutive model of flow stress for MarBN steel is developed based on the hyperbolic sine law.Keywords
Funding Information
- the National Natural Science Research Funds of China (12272245, 11832007, 12172238, 2019M653396, 2018YFE0307104, 2022NSFSC0324, 2019CDZG-4, DECSKL202102)
- the National Postdoctoral funds of China (12272245, 11832007, 12172238, 2019M653396, 2018YFE0307104, 2022NSFSC0324, 2019CDZG-4, DECSKL202102)
- the National Key R & D Program (12272245, 11832007, 12172238, 2019M653396, 2018YFE0307104, 2022NSFSC0324, 2019CDZG-4, DECSKL202102)
- the Applied Basic Research Programs of Sichuan Province (12272245, 11832007, 12172238, 2019M653396, 2018YFE0307104, 2022NSFSC0324, 2019CDZG-4, DECSKL202102)
- the Sichuan University and ZiGong Government Support Program (12272245, 11832007, 12172238, 2019M653396, 2018YFE0307104, 2022NSFSC0324, 2019CDZG-4, DECSKL202102)
- the International Visiting Program for Excellent Young Scholars of SCU (12272245, 11832007, 12172238, 2019M653396, 2018YFE0307104, 2022NSFSC0324, 2019CDZG-4, DECSKL202102)
- the fund of the State Key Laboratory of Long-Life High-Temperature Materials (12272245, 11832007, 12172238, 2019M653396, 2018YFE0307104, 2022NSFSC0324, 2019CDZG-4, DECSKL202102)
This publication has 42 references indexed in Scilit:
- Constitutive analysis to predict the hot deformation behavior of 34CrMo4 steel with an optimum solution method for stress multiplierInternational Journal of Pressure Vessels and Piping, 2014
- Multiaxial cyclic viscoplasticity model for high temperature fatigue of P91 steelMaterials Science and Technology, 2014
- U.S. Program on Materials Technology for Ultra-Supercritical Coal Power PlantsJournal of Materials Engineering and Performance, 2013
- Constitutive equations for high temperature flow stress of TC4-DT alloy incorporating strain, strain rate and temperatureMaterials & Design (1980-2015), 2013
- Precipitate design for creep strengthening of 9% Cr tempered martensitic steel for ultra-supercritical power plantsScience and Technology of Advanced Materials, 2008
- U.S. Program on Materials Technology for Ultra-Supercritical Coal Power PlantsJournal of Materials Engineering and Performance, 2005
- A one-parameter approach to determining the critical conditions for the initiation of dynamic recrystallizationActa Materialia, 1996
- Overview No. 3 Fracture-mechanism maps and their construction for f.c.c. metals and alloysActa Metallurgica, 1979
- On the mechanism of hot deformationActa Metallurgica, 1966
- Effect of Strain Rate Upon Plastic Flow of SteelJournal of Applied Physics, 1944