Continuous foaming for protein recovery: Part II. Selective recovery of proteins from binary mixtures
Authors:
- 5 February 1999
- journal article
- research article
- Published by Wiley in Biotechnology and Bioengineering
- Vol. 62 (3) , 291-300
Abstract
Foam separation may have potential for protein recovery. However, for foam separation to be a viable protein recovery technique it is important to demonstrate, not only that high enrichments and recoveries can be achieved for single proteins, but also that high enrichments and recoveries, together with selectivity of partition, can be achieved for recovery from multi-component mixtures. Most process streams which require purification are indeed complex multi-component mixtures, for example, fermentation broths. In this study, three binary protein mixtures were chosen for continuous foam separation: β-casein:lysozyme; Bovine serum albumin (BSA):lysozyme and β-casein:BSA (mixtures 1, 2, and 3, respectively). For each of these mixtures, the expected outcome of each experiment, based on a previous knowledge and determination of relevant protein physical properties, was that the first protein should be preferentially separated into the foam phase. On the basis of results reported in Part I of this study for the continuous foam separation of β-casein, conditions found to favor maximum enrichment were selected. For each mixture a range of concentrations of both proteins was considered. For mixture 1, maximum protein recoveries in the foam phase were 85.6% and 25% for β-casein and lysozyme, respectively; and for mixture 2, maximum recoveries of 77.6% and 18.9% were obtained for BSA and lysozyme, respectively. Maximum enrichment ratios in the foam phase were 79.4 and 2.5 for β-casein and lysozyme respectively in mixture 1; and 74.0 and 1.4 for BSA and lysozyme respectively in mixture 2. Selective partitioning of β-casein and BSA into the foam phase was obtained in mixtures 1 and 2, respectively, particularly for protein concentrations at which dilute protein films are known to form at the gas–liquid interface in the foam. Maximum partition ratios for mixtures 1 and 2 were 31.8 and 52.8, respectively. For mixture 3, both BSA and β-casein were enriched into the foam phase. Maximum enrichments were 42.9 and 24.7 for BSA and β-casein, respectively; however, selective partitioning in mixture 3 was limited (maximum partition ratio being 1.8). © 1999 John Wiley & Sons, Inc. Biotechnol Bioeng 62: 291–300, 1999.Keywords
This publication has 28 references indexed in Scilit:
- Kinetics of Adsorption of Lysozyme and Bovine Serum Albumin at the Air–Water Interface from a Binary MixtureJournal of Colloid and Interface Science, 1995
- Coadsorption of .beta.-Casein and Bovine Serum Albumin at the Air-Water Interface from a Binary MixtureJournal of Agricultural and Food Chemistry, 1995
- Purification of alkaline protease of Rhizopus oryzae by foam fractionationBioprocess and Biosystems Engineering, 1993
- Effect of Physicochemical Parameters on the Separation of Proteins from Human Placental Extract by Using a Continuous Foam Fractionating ColumnSeparation Science and Technology, 1991
- Foam fractionation of globular proteinsBiotechnology and Bioengineering, 1990
- Protein Adsorption at Liquid Interfaces and the Relationship to Foam Stability1989
- Characterization of the foaming properties of lysozymes and α-lactalbumins: a structural evaluationFood Hydrocolloids, 1988
- Protein recovery by continuous flotationApplied Microbiology and Biotechnology, 1984
- Proteins at liquid interfacesJournal of Colloid and Interface Science, 1979
- On the average hydrophobicity of proteins and the relation between it and protein structureJournal of Theoretical Biology, 1967