Synthesis and Application of a Low Dye Absorption Waterborne Polyurethane for Microfiber Synthetic Leather
Open Access
Abstract
As increasing attention is being paid to harmful residual dye pollution in the dyeing effluent from the microfiber synthetic leather industry, there is an urgent need to explore innovative ways to alleviate such pollution. Here, a low-polarity waterborne polyurethane (WPU) was synthesized using hydroxyl-terminated polybutadiene (HTPB) and polypropylene glycol (N220) as soft segments to react with –NCO on isophorone diisocyanate (IPDI). The structure and properties of modified waterborne polyurethane were characterized by Fourier Transform Interferometric Radiometer (FTIR), and emulsion characterization was performed, including particle size and zeta potential analysis, tensile test, thermal properties test, and contact angle test. The SEM and alkali reduction rate results showed that increasing the HTPB content decreases the alkali reduction rate by blocking the penetration of corrosive ions by the double bond cross-link structure, but higher HTPB addition (>40%) leads to an enhancement in phase separation, which contributes to an increase in the alkali reduction rate. The results of the UV spectrum analysis showed that when the amount of HTPB added was 50%, the coloration rate reached 81.27% compared with 13.18%, which was 68.09% higher than that of the unmodified microfiber leather. The binding of the dry and wet rubbing color of the modified microfiber leather with the addition of 50% HTPB reached grades of 4–5 and 3–4, respectively, which meets most application requirements without subsequent washing.Keywords
This publication has 29 references indexed in Scilit:
- An investigation of the effects of pre-polymer functionality on the curing behavior and mechanical properties of HTPB-based polyurethaneJournal of Industrial and Engineering Chemistry, 2015
- One-pot synthesis of hyperbranched polyols and their effects as crosslinkers on HTPB-based polyurethanePolymer Bulletin, 2014
- Influence of Polyol Molecular Weight and Type on the Tack and Peel Properties of Waterborne Polyurethane Pressure‐Sensitive AdhesivesMacromolecular Reaction Engineering, 2013
- Structural factors and physical properties of needle-punched nonwovens based on Co-PET/PA bicomponent fibers via alkali treatmentFibers and Polymers, 2012
- Synthesis, phase behavior, and simulated in vitro degradation of novel HTPB-b-PEG polyurethane copolymersMacromolecular Research, 2011
- Thermal and tensile properties of HTPB-based PU with PVC blendsMaterials Science and Engineering: A, 2011
- Comfort, chemical, mechanical, and structural properties of natural and synthetic leathers used for apparelJournal of Applied Polymer Science, 2009
- Effects of ion group content and polyol molecular weight on physical properties of HTPB‐based waterborne poly(urethane‐urea)sJournal of Applied Polymer Science, 2007
- Synthesis of new anionic HTPB‐based polyurethane elastomers: Aqueous dispersion and physical propertiesJournal of Applied Polymer Science, 2006
- Characterization of waterborne polyurethane adhesives containing different amounts of ionic groupsInternational Journal of Adhesion and Adhesives, 2005