Permeability and Porosity Evolution of Organic-Rich Shales from the Green River Formation as a Result of Maturation
Authors:
- 24 February 2020
- journal article
- research article
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 25 (03) , 1377-1405
Abstract
Summary: Source rocks (oil shale) were matured artificially via pyrolysis under geologically realistic triaxial stresses using a unique coreholder that is compatible with X-ray computed tomography (CT) scanning. This study focuses on characterization of porosity and permeability as well as the evolution of shale fabric during pyrolysis. Experiments were conducted using 1-in. diameter vertical and horizontal core samples from the Green River Formation. Prior to pyrolysis, the properties of the source rock were characterized [e.g., porosity, bulk density, mineralogy, and total organic carbon (TOC)]. Samples were then heated from room temperature to 350°C under a nitrogen environment to obtain conversion of organic matter (OM) to oil and gas via pyrolysis. Porosity and permeability after maturation were measured. Micro-CT visualization was applied to investigate the fracture network developed throughout the core. Scanning electron microscopy (SEM) images were also used to compare the shale fabric and porosity evolution (pre- to post-maturation) at greater resolution. In-situ observations reveal a decrease in the average CT number (i.e., density) within some volumetric regions of the cores after maturation. In these regions, OM (kerogen and bitumen) was converted into hydrocarbons. Changes in the source rock depend on the original TOC fraction, hydrogen index (HI), and temperature. The permeability prior to pyrolysis for vertical samples is in the undetectable to nanodarcy range. The permeability of all cores increased to the microdarcy range post-maturation. In particular, the permeability of the horizontal sample increased from 0.14 to 50 µd. This improvement in permeability occurred due to the generation of open porosity and fractures (dilation, generation, and/or drainage). Additionally, the porosity after Soxhlet extraction increased proportionally by 20% from pre- to post-pyrolysis depending on pyrolysis time and TOC fraction. Longitudinal deformation depends on the orientation of the sample with respect to the triaxial stress during pyrolysis. The deformation of vertically oriented samples with isostress conditions is larger than that of horizontally oriented samples with isostrain. The measured 3D in-situ porosity distribution indicates that OM has transformed into hydrocarbons by pyrolysis. The development of a fracture and matrix porosity system under stress provides an explanation for transport of hydrocarbon away from its point of origin.Keywords
This publication has 34 references indexed in Scilit:
- CT Imaging of Low-Permeability, Dual-Porosity Systems Using High X-ray Contrast GasTransport in Porous Media, 2013
- Characterization of oil shale pore structure before and after pyrolysis by using X-ray micro CTFuel, 2013
- Studies of the effect of retorting factors on the yield of shale oil for a new comprehensive utilization technology of oil shaleApplied Energy, 2009
- Computed tomography in petroleum engineering researchGeological Society, London, Special Publications, 2003
- Influence of residence time and catalyst regeneration on the pyrolysis–zeolite catalysis of oil shaleJournal of Analytical and Applied Pyrolysis, 2001
- Extraction of high molecular weight hydrocarbons from source rocks: an example from the Green River Formation, Uinta Basin, UtahOrganic Geochemistry, 1998
- Programmed pyrolysis-gas chromatography of artificially matured Green River kerogenEnergy & Fuels, 1988
- High-Pressure Pyrolysis of Green River Oil Shale1983
- The effect of microcrack dilatancy on the permeability of westerly graniteJournal of Geophysical Research, 1975
- Permeability of granite under high pressureJournal of Geophysical Research, 1968