A Double-Bridge Channel Shape of a Membraneless Microfluidic Fuel Cell
Open Access
Abstract
A double-bridge shape is proposed as a novel flow channel cross-sectional shape of a membraneless microfluidic fuel cell, and its electrochemical performance was analyzed with a numerical model. A membraneless microfluidic fuel cell (MMFC) is a micro/nano-scale fuel cell with better economic and commercial viability with the elimination of the polymer electrolyte membrane. The numerical model involves the Navier–Stokes, Butler–Volmer, and mass transport equations. The results from the numerical model were validated with the experimental results for a single-bridge channel. The proposed MMFC with double-bridge flow channel shape performed better in comparison to the single-bridge channel shape. A parametric study for the double-bridge channel was performed using three sub-channel widths with the fixed total channel width and the bridge height. The performance of the MMFC varied most significantly with the variation in the width of the inner channel among the sub-channel widths, and the power density increased with this channel width because of the reduced width of the mixing layer in the inner channel. The bridge height significantly affected the performance, and at a bridge height at 90% of the channel height, a higher peak power density of 171%was achieved compared to the reference channel.Keywords
Funding Information
- National Research Foundation of Korea (2019R1A2C1007657)
This publication has 44 references indexed in Scilit:
- Chaotic flow-based fuel cell built on counter-flow microfluidic network: Predicting the over-limiting current behaviorJournal of Power Sources, 2011
- Design, fabrication, and characterization of a planar, silicon-based, monolithically integrated micro laminar flow fuel cell with a bridge-shaped microchannel cross-sectionJournal of Power Sources, 2011
- Numerical study of the effect of the channel and electrode geometry on the performance of microfluidic fuel cellsJournal of Power Sources, 2010
- An air-breathing microfluidic formic acid fuel cell with a porous planar anode: experimental and numerical investigationsJournal of Micromechanics and Microengineering, 2010
- Chip integrated fuel cell accumulatorJournal of Power Sources, 2008
- Monolithically integrated planar microfuel cell arraysSensors and Actuators B: Chemical, 2007
- Characterization of microfluidic fuel cell based on multiple laminar flowMicroelectronic Engineering, 2007
- Parametric study of solid oxide fuel cell performanceEnergy Conversion and Management, 2007
- Microfabrication and characterization of a silicon-based millimeter scale, PEM fuel cell operating with hydrogen, methanol, or formic acidSensors and Actuators B: Chemical, 2005
- Verification of Codes and CalculationsAIAA Journal, 1998