Application of Electric Current‐Assisted Sintering Techniques for the Processing of Advanced Materials
Open Access
- 6 March 2020
- journal article
- review article
- Published by Wiley in Advanced Engineering Materials
- Vol. 22 (6)
Abstract
Highly efficient energy conversion and storage technologies such as high‐temperature solid oxide fuel and electrolysis cells, all‐solid‐state batteries, gas separation membranes, and thermal barrier coatings for advanced turbine systems depend on advanced materials. In all cases, processing of ceramics and metals starting from powders plays a key role and is often a challenging task. Depending on their composition, such powder materials often require high sintering temperatures and show an inherent risk of abnormal grain growth, evaporation, chemical reaction, or decomposition, especially in the case of long dwelling times. Electric current‐assisted sintering (ECAS) techniques are promising to overcome these restrictions, but a lot of fundamental and practical challenges must be solved properly to take full advantage of these techniques. A broad and long‐term expertise in the field of ECAS techniques and comprehensive facilities including conventional field‐assisted sintering technology/spark plasma sintering (FAST/SPS), hybrid FAST/SPS (with additional heater), sinter forging, and flash sintering (FS) devices are available at the Institute of Energy and Climate Research: Materials Synthesis and Processing (IEK‐1). Herein, main advantages and challenges of these techniques are discussed and the concept to overcome current limitations is introduced on selected examples.Keywords
Funding Information
- Deutsche Forschungsgemeinschaft (BR3418/1-1, GU993/9-1)
- Bundesministerium für Forschung, Technologie und Raumfahrt (13XP0134A)
This publication has 96 references indexed in Scilit:
- Localized Overheating Phenomena and Optimization of Spark-Plasma Sintering Tooling DesignMaterials, 2013
- Flash‐Sintering of Cubic Yttria‐Stabilized Zirconia at 750°C for Possible Use in SOFC ManufacturingJournal of the American Ceramic Society, 2011
- Characterization of the interface between LiCoO2 and Li7La3Zr2O12 in an all-solid-state rechargeable lithium batteryJournal of Power Sources, 2011
- Electric Current Activation of Sintering: A Review of the Pulsed Electric Current Sintering ProcessJournal of the American Ceramic Society, 2010
- Processing characteristics and parameters in capacitor discharge sinteringJournal of Materials Processing Technology, 2010
- Current-Activated, Pressure-Assisted Densification of MaterialsAnnual Review of Materials Research, 2010
- Electric current activated/assisted sintering (ECAS): a review of patents 1906–2008Science and Technology of Advanced Materials, 2009
- Consolidation/synthesis of materials by electric current activated/assisted sinteringMaterials Science and Engineering: R: Reports, 2009
- The influence of percolation during pulsed electric current sintering of ZrO2–TiN powder compacts with varying TiN contentActa Materialia, 2007
- Temperature evolution during field activated sinteringMaterials Science and Engineering: A, 2004