Design validation of high inertia generator rotor
Authors:
- Ambresh GhaleaAGAmbresh Ghalea
- H. VarshithaHVH. Varshitha
- M. Vijay KumarMKM. Vijay Kumar
- Mahantesh M. MathdMMMahantesh M. Mathd
- 16 February 2021
- conference paper
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2316 (1) , 030005
Abstract
The rising urbanization in the developing economies and growing demand from the IT industries are the factors that are driving the global generator sales market. The global electric generator sales market is projected to reach USD 31.6 billion by 2025. Even though the market demand is high, the unbalance force is the vital key role for the vibration of a rotor and also critical speed and torsional vibration. The main goal of the present study is to validate the torsional frequency, critical speed analysis and unbalance response analysis of an operating generator at a speed of 750 rpm. The finite element model was developed using MADYN 2000 software based on the rotor dynamics. The rotor consists of 25 different step diameters. For analysis, the rotor is divided into 42 sections having 43 stations. The stiffness of DE bearings is 3.38E+05 N/mm and 2.32E+05 N/mm in vertical and horizontal directions respectively. The stiffness of NDE bearings is 1.5E+05 N/mm and 1.57E+05 N/mm in horizontal and vertical directions respectively. Analysis is carried out by giving input as 0.1-500 Hz frequency range, relative ratio 10: 20: 500 and speed range from 250 to 5000 rpm. The capacity of the generator is 10MW. The torsional natural frequency is 122.06 Hz and the mode shape is obtained from numerical analysis. Five mode shape frequencies are determined. The displacement of a rotor in static condition is 0.28 mm. The first critical bending speed is 1455.3 rpm and second critical speed is 3194.7 rpm obtained from Campbell diagram. Evaluated torsional natural frequency, static analysis of rotor, critical bending speed and unbalance response analysis are under the design limits, hence they were accepted. Finally, results are validated with a baseline design which are helpful for further researches.Keywords
This publication has 11 references indexed in Scilit:
- Rotating Machinery Research and Development Test Rigs2017
- Complex harmonic modal analysis of rotor systemsJournal of Mechanical Science and Technology, 2015
- Unbalance Response Analysis and Experimental Validation of an Ultra High Speed Motor-Generator for Microturbine Generators Considering BalancingSensors, 2014
- Free Vibration and Material Mechanical Properties Influence Based Frequency and Mode Shape Analysis of Transmission Gearbox CasingProcedia Engineering, 2014
- Analytical Solution for Whirling Speeds and Mode Shapes of a Distributed-Mass Shaft With Arbitrary Rigid DisksJournal of Applied Mechanics, 2013
- Machinery Vibration and Rotordynamics2010
- The influence of natural frequency of the experimental set-up on the friction coefficient of copperProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2009
- Failure analysis of generator rotor fan bladesEngineering Failure Analysis, 2007
- Influence of unbalanced magnetic pull on the radial stability of flexible-shaft induction machinesIEE Proceedings B Electric Power Applications, 1987
- Secondary critical speed of flexible rotors with inertia slotsJournal of Sound and Vibration, 1983