Vibration control of imbalanced Jeffcott rotor by virtual passive dynamic absorber with optimal parameter values
- 8 January 2018
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 232 (23) , 4278-4288
Abstract
Today, dynamic absorbers are widely used to control vibrations of the systems that are being excited by the harmonic forces. In this paper, the usage of the magnetic force as virtual dynamic absorber for vibration control in rotary systems is investigated. In order to examine this new method, two different types of passive dynamic absorber systems are applied to control imbalanced Jeffcott rotor vibrations. In the first type of the absorber system, damper is located between the absorber mass and the disk and in the second type, it is located between the absorber mass and the ground. Then, the optimal parameters of absorber system, stiffness and damping have been analytically achieved by using two fixed points theory. Moreover, for further reduction of the vibration amplitude, combined paths have been designed for rotor frequency response. Finally, in order to evaluate the obtained results, the experimental data of our virtual dynamic absorbers were compared with simulation results and it is found that the vibration amplitude of rotor was efficiently limited in this case. Furthermore, the second type of the absorber system with equal mass ratio to the first type of the absorber system was more efficient than the first one in reduction of the amplitude of vibrations. Our findings show that the second absorber transfer more force than the first one since the second absorber connects chasis of system with damper. Therefore, it is recommended to apply the first absorber after the first resonance.Keywords
This publication has 20 references indexed in Scilit:
- Optimal design of a hysteretic vibration absorber using fixed-points theoryThe Journal of the Acoustical Society of America, 2016
- Tuned mass absorber on a flexible structureJournal of Sound and Vibration, 2014
- OPTIMAL DESIGN OF DAMPED DYNAMIC VIBRATION ABSORBER FOR DAMPED PRIMARY SYSTEMSTransactions of the Canadian Society for Mechanical Engineering, 2010
- Tuning dynamic vibration absorbers by using ant colony optimizationComputers & Structures, 2008
- Fixed-points theory for global vibration control using vibration neutralizerJournal of Sound and Vibration, 2006
- The damped dynamic vibration absorbers: revisited and new resultJournal of Sound and Vibration, 2005
- Closed-Form Solutions to the Exact Optimizations of Dynamic Vibration Absorbers (Minimizations of the Maximum Amplitude Magnification Factors)Journal of Vibration and Acoustics, 2002
- Analytical Solutions to H∞ and H2 Optimization of Dynamic Vibration Absorbers Attached to Damped Linear SystemsJournal of Vibration and Acoustics, 2002
- A VARIANT DESIGN OF THE DYNAMIC VIBRATION ABSORBERJournal of Sound and Vibration, 2001
- Optimum absorber parameters for various combinations of response and excitation parametersEarthquake Engineering & Structural Dynamics, 1982