Currents in series and parallel connections of small inner bore coils wound from Bi(2223)/Ag tapes and treated by the wind and react technique
- 1 January 1999
- journal article
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 12 (8) , 507-513
Abstract
A set of small inner bore (8.5 mm) single pancake coils was wound from multifilament Bi(2223)/Ag tapes using the `wind and react' (W&R) technique. W&R means sintering heat treatment of the Bi(2223)/Ag tape wound to a pancake coil. During the winding procedure, the tape was insulated by a mixture of Al2O3 or ZrO2 powders with varnish. After the first sintering step (841 °C/50 h), the printed insulation was easily removed and the tape with a clean surface was subjected to intermediate deformation by rolling. After the final heat treatment (841 °C/150 h), the coils were impregnated by epoxy resin. Electrical measurements of individual pancakes certified the good quality of interturn insulation. Some variations of transport currents among the pancakes were measured. The selected coils were connected in series or parallel and current distribution and I-V curves of individual coils were measured. Comparison of both connections is discussed in detail. The results of a small magnet arranged by connection of five single pancake coils with partial compensation of the radial field component is also presented. The compensation of the radial field component allows us to increase the magnetic field in the bore axis by 215%. Further lowering of temperature to 65 K allows us to generate a magnetic field nearly five times higher than in the case of the non-compensated winding at 77 K.Keywords
This publication has 18 references indexed in Scilit:
- Performance tests of Bi-2223 pancake magnetCryogenics, 1998
- Fabrication and properties of superconducting magnets using Bi2Sr2CaCu2Ox/Ag tapesCryogenics, 1996
- Development of Ag-sheathed Bi(2223) superconducting wires and coilsPhysica C: Superconductivity and its Applications, 1996
- Magnetic field enhancement of high-T c superconducting pancake coils by Mu metal sheetsJournal of Superconductivity, 1996
- Some operating characteristics of an ironclad high-temperature superconducting coil at 77 KCryogenics, 1996
- Factors determining the magnetic field generated by a solenoid made with a superconductor having critical current anisotropyCryogenics, 1995
- Generation of 21.5 T by a superconducting magnet system using a Bi2Sr2CaCu2Ox/Ag coil as an insert magnetApplied Physics Letters, 1994
- Recent issues in fabrication of high-Tc magnets and long-length multifilament conductorsApplied Superconductivity, 1994
- High-J/sub c/ silver-sheathed Bi-based superconducting wiresIEEE Transactions on Magnetics, 1991
- Design and operational issues for 77-K superconducting magnetsIEEE Transactions on Magnetics, 1988