Surface‐methacrylated microcrystalline cellulose bioresins with soybean oil for additive manufacturing via vat photopolymerization
Authors:
- 4 March 2024
- journal article
- research article
- Published by Wiley in Journal of Polymer Science
- Vol. 62 (12) , 2692-2703
Abstract
The additive manufacturing (AM) industry increasingly looks to differentiate itself by utilizing materials and processes that are green, clean, and sustainable. Biopolymers, bio‐sourced raw materials and light weighting of parts 3D printed with photopolymer resins each represent critical directions for the future of AM. Here, we report a series of bio‐based composite resins with soybean oil derivatives, up to 20% by weight of surface‐methacrylated micro‐crystalline cellulose (MCC) and 60% total bio‐based content for vat photopolymerization based additive manufacturing. The ultimate tensile strengths of the materials were found to increase up to 3X, the Young's moduli increased up to 10X, and the glass transition temperature increased by 11.3°C when compared to the neat resin without surface‐methacrylated MCC as a filler. Working curves and shrinkage factors were used to demonstrate how the surface‐methacrylated MCC causes changes in the dimensions of printed parts, to facilitate development of optimized print parameters based on the UV intensity of the 3D printer being used. These results will allow further development of commercial 3D printable resins with a high concentration of bio‐based fillers that print well and perform on par with conventional resins.Keywords
Funding Information
- University of Texas at Dallas
This publication has 49 references indexed in Scilit:
- Lignin‐based covalent adaptable network resins for digital light projection 3D printingJournal of Polymer Science, 2023
- High biorenewable content acrylate photocurable resins for DLP 3D printingJournal of Applied Polymer Science, 2020
- Photocross‐linked polymers based on plant‐derived monomers for potential application in optical 3D printingJournal of Applied Polymer Science, 2019
- 3D printed cellulose nanocrystal composites through digital light processingCellulose, 2019
- Synthesis and characterization of microcrystalline cellulose powder from corn husk fibres using bio-chemical routeCellulose, 2017
- Cellulose Nanocrystal Inks for 3D Printing of Textured Cellular ArchitecturesAdvanced Functional Materials, 2017
- Additive Manufacturing of Cellulosic Materials with Robust Mechanics and Antimicrobial FunctionalityAdvanced Materials Technologies, 2017
- Mechanical properties of biodegradable composites from poly lactic acid (PLA) and microcrystalline cellulose (MCC)Journal of Applied Polymer Science, 2005
- Deformation measurements by digital image correlation: Implementation of a second-order displacement gradientExperimental Mechanics, 2000
- Epoxidation of bacterial polyesters with unsaturated side chains. II. Rate of epoxidation and polymer propertiesJournal of Polymer Science Part A: Polymer Chemistry, 1998