Critical Current Analysis of an YBCO Insert for Ultrahigh-Field All-Superconducting Magnet
Authors:
- 24 February 2016
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 26 (3) , 1-6
Abstract
With the development of superconducting magnet technology, high magnetic field experimental conditions can be more easily achieved than ever. Recently, a superconducting magnet with the center field of 25 T at 4.2 K and a worm bore size of 32 mm in diameter has been designed. The superconducting magnet consists of NbTi, Nb3Sn coils, and YBCO insert. The YBCO insert has been designed, fabricated, and tested in the liquid helium at the Institute of Electrical Engineering, Chinese Academy of Sciences (IEE, CAS), to prove the technical feasibility to achieve the target of 25 T. The YBCO insert has the inner diameter, outer diameter, and height of 41, 124, and 115 mm, respectively. The critical current distribution of the YBCO insert at 77 and 4.2 K, self-field, and in a 15-T background field is given in detail, based on the electrical properties of an YBCO-coated conductor. An analysis on the critical current shows that the YBCO insert has a minimum critical current of 19.4 A at 77 K, 119 A at 4.2 K, at the self-field, respectively, and 177 A at 4.2 K in a 15-T background field. Preliminary tests in the liquid nitrogen and liquid helium show that the analysis on the critical current is reasonable and agrees well with the test. The analysis on critical current at 4.2 K shows that it is much reasonable for the YBCO insert to obtain a central magnetic field of up to 24 T in a 15-T background field. In this paper, the design, critical current analysis, and preliminary experiment are reported.Keywords
Funding Information
- National Natural Science Foundation of China (51307163)
- National Science & Technology Pillar (2012BAI14B04)
This publication has 13 references indexed in Scilit:
- High Temperature Superconducting YBCO Insert for 25 T Full Superconducting MagnetIEEE Transactions on Applied Superconductivity, 2014
- Design Study on a 9.2-T NbTi Superconducting Magnet With Long-Length Uniform Axial FieldIEEE Transactions on Applied Superconductivity, 2014
- Design of YBCO Insert Coil for a Cryogen-Free 22 T Superconducting MagnetIEEE Transactions on Applied Superconductivity, 2013
- Development of Magnet Technologies for HTS Insert CoilsPhysics Procedia, 2012
- Generation of 24 T at 4.2 K using a layer-wound GdBCO insert coil with Nb3Sn and Nb–Ti external magnetic field coilsSuperconductor Science and Technology, 2012
- Design of a Superconducting 32 T Magnet With REBCO High Field CoilsIEEE Transactions on Applied Superconductivity, 2011
- A 1.3 GHz NMR Magnet Design Under High Hoop Stress ConditionIEEE Transactions on Applied Superconductivity, 2010
- Angular Dependence of Critical Current in Coated Conductors at 4.2 K and Magnet DesignIEEE Transactions on Applied Superconductivity, 2009
- ANGULAR MEASUREMENTS OF HTS CRITICAL CURRENT FOR HIGH FIELD SOLENOIDSAIP Conference Proceedings, 2008
- Effects of conductor anisotropy on the design of Bi Sr Ca Cu O sections of 25 T solenoidsSuperconductor Science and Technology, 2003