Virtual Mass Method for Solution of Dynamic Response of Composite Cushion Packaging System
Authors:
- 8 October 2012
- journal article
- chinese packaging-institute---2012-conference
- Published by Wiley in Packaging Technology and Science
- Vol. 26 (S1) , 32-42
Abstract
A composite package cushioning system consists of multiple layers of cushioning materials in series. Such composite cushioning systems will enhance the protection capability to the packaged products. However, the dynamic analysis of the composite cushioning system becomes more difficult because of the strong nonlinear characteristics of cushioning materials. To overcome the difficulty in calculation, the method of virtual mass is proposed to form the system equations of motion as a set of multidimensional ordinary differential equations so that the Runge–Kutta method can be applied to obtain the numerical solution of the system response. The rationale of the method is shown both analytically and numerically by assessing the reliability of the virtual mass method. For a specific composite cushioning system consisting of two layers of expanded polystyrene (EPS) and expanded polyethylene (EPE) materials, experiments were carried out first for each material to obtain the stress–strain behaviours under both static and dynamic loadings. On the basis of these data, the stress–strain constitutive models were developed for EPS and EPE. Then, experiments were conducted for the composite cushioning system under different system parameters, and the measured data are compared with the analytical results using the method of virtual mass. The agreement between the analytical and the experimental results substantiates the accuracy of the proposed virtual mass method. Copyright © 2012 John Wiley & Sons, Ltd.Keywords
This publication has 13 references indexed in Scilit:
- Study on Shock Response of Cushion Packaging System Based on Combined Model Using Hyperbolic Tangent and Tangent Functions with Consideration of Rotation EffectApplied Mechanics and Materials, 2011
- Finite element analysis of expanded polystyrene foam under multiple compressive loading and unloadingMaterials & Design (1980-2015), 2011
- Evaluation of product dropping damage based on key componentPackaging Technology and Science, 2010
- Experimental investigation into the cushioning properties of honeycomb paperboardPackaging Technology and Science, 2008
- Mechanical models of cellular solids: Parameters identification from experimental testsInternational Journal of Impact Engineering, 2007
- Enhancement of cushioning performance with paperboard crumple insertsPackaging Technology and Science, 2005
- Effect of temperature on the cushioning properties of some foamed plastic materialsPackaging Technology and Science, 2003
- Dropping damage boundary curves for cubic and tangent package cushioning systemsPackaging Technology and Science, 2002
- A new method for the determination of cushion curvesPackaging Technology and Science, 2000
- Damage boundary of a packaging system under rectangular pulse excitationPackaging Technology and Science, 1998