Al/AlN/InP Metal-Insulator-Semiconductor-Diode Characteristics with Amorphous AlN Films Deposited by Electron-Cyclotron-Resonance Sputtering
- 1 January 2005
- journal article
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 44 (1R) , 334-342
Abstract
Amorphous AlN films deposited by sputtering using electron cyclotron resonance (ECR) plasma were used to form AlN/n-InP metal–insulator–semiconductor diodes. The AlN films were deposited without substrate heating. Capacitance–voltage (C–V) measurements showed a small hysteresis window of ∼35 mV for a 2-nm-thick AlN film, and frequency dispersion was much improved by post-deposition annealing at 200°C in an H2 gas atmosphere. We estimated the interface-trap density to be 3×1012 cm-2eV-1 by comparing 10-kHz and 1-MHz C–V curves. Small leakage currents of less than 2 mA/cm2 at a bias voltage of 1 V were obtained for the 2-nm-thick film. To clarify the effect of the deposition methods, AlN films were deposited by conventional magnetron sputtering. ECR sputtering provided better C–V and current-voltage characteristics than magnetron sputtering for as-deposited AlN films, showing that good metal–insulator–semiconductor (MIS) properties arise because of the suitable deposition method and the good combination of materials. An analysis of surface atoms on the InP substrate by secondary ion mass spectrometry showed a large oxygen concentration on the order of 1022 cm-3, which is not preferable for MIS diode properties. Surface cleaning using dilute HF reduced oxygen and carbon concentrations to less than half.Keywords
This publication has 12 references indexed in Scilit:
- Theoretical Analysis of the Electrode Potential of the Newly Designed KCl Buffered External Ag/AgCl ElectrodeJournal of the Electrochemical Society, 2004
- Using electron cyclotron resonance sputtering in the deposition of ultrathin Al2O3 gate dielectricsJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2003
- Reduction of effective dielectric constant of gate insulator by low-resistivity electrodesApplied Physics Letters, 2002
- Optimization and Interface Characterization of a Novel Oxide-Free Insulated Gate Structure for InP Having an Ultrathin Silicon Interface Control LayerJapanese Journal of Applied Physics, 2002
- Tantalum and tantalum nitride films deposited by electron cyclotron resonance sputtering as barriers to copper diffusionJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1999
- Low interface trap density in rapid thermally annealed Al/SiNx:H/InP metal–insulator–semiconductor devicesApplied Physics Letters, 1999
- An AlN/GaN insulated gate heterostructure field effect transistor with regrown n+GaN source and drain contactJournal of Crystal Growth, 1998
- Electrical Characteristics and the X-ray Photoelectron Spectroscopy of AlN/InP Structure Fabricated by Helicon-Wave-Excited Plasma Nitridation of Vacuum-Evaporated AlJapanese Journal of Applied Physics, 1997
- Application of electron cyclotron resonance plasma source to conductive film depositionJournal of Vacuum Science & Technology A, 1995
- Electrical properties of distributed electron cyclotron resonance plasma-deposited SiO2-InP diodesApplied Physics Letters, 1991